Having announced last night that I had fixed the problem I now have
to reply to one of my postings once again to announce that the
problem is there - bigger and badder than ever... actually it's a
different problem now...
basically I can get the interface recognised but it's not receiving
or transmitting anything as far as I can tell - basically the network
segment it's serving is pretty dead as far as the clients are
concerned. Following are some diagnostic type things that may help....
[root@server src]# ifdown eth0
[root@server src]# ifup eth0
SIOCADDRT: Network is unreachable
[root@server src]# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:40:95:1A:07:89
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:4 overruns:0 frame:0
TX packets:0 errors:146 dropped:0 overruns:0 carrier:0
collisions:0
[root@server src]# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
139.139.65.60 * 255.255.255.255 UH 0 0 0 ppp0
192.168.2.1 * 255.255.255.255 UH 0 0 0 eth0
192.168.2.0 * 255.255.255.0 U 0 0 0 eth0
127.0.0.0 * 255.0.0.0 U 0 0 0 lo
default 139.139.65.60 0.0.0.0 UG 0 0 0 ppp0
[root@server src]# ping 192.168.2.1
PING 192.168.2.1 (192.168.2.1) from 192.168.2.1 : 56(84) bytes of data.
64 bytes from 192.168.2.1: icmp_seq=0 ttl=255 time=0.8 ms
64 bytes from 192.168.2.1: icmp_seq=1 ttl=255 time=0.6 ms
64 bytes from 192.168.2.1: icmp_seq=2 ttl=255 time=0.5 ms
--- 192.168.2.1 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.5/0.6/0.8 ms
[root@server src]# ./ne2k-diag -p 0x260 -ee -aa -v
ne2k-diag.c:v2.00 4/19/2000 Donald Becker ([EMAIL PROTECTED])
Checking the ethercard at 0x260.
Receive alignment error counter (0x26d) is 00
Passed initial NE2000 probe, value 00.
Station Address PROM 0: 00 00 40 40 95 95 1a 1a 07 07 89 89 00 00 00 00
Station Address PROM 0x10: 00 00 00 00 e7 e7 08 08 00 00 00 00 57 57 57 57
NE2000 found at 0x260, using start page 0x40 and end page 0x80.
The current MAC stations address is 00:40:95:1A:07:89.
8390 page 0: 20 3c 78 7f 01 00 00 40 20 00 5b 03 01 00 00 00.
8390 page 1: 60 00 40 95 1a 07 89 4c 00 00 00 81 00 ff 00 80.
8390 page 2: a0 4c 80 27 40 78 00 20 00 9c 00 40 20 00 4d 00.
8390 page 3: e0 00 40 95 1a 07 89 00 00 00 00 81 00 ff 00 80.
[root@server src]# cat /etc/conf.modules
alias char-major-108 ppp
alias eth0 ne
options eth0 io=0x260 irq=5
[root@server src]# ping 192.168.2.107
PING 192.168.2.107 (192.168.2.107) from 192.168.2.1 : 56(84) bytes of data.
From fw (192.168.2.1): Destination Host Unreachable
From fw (192.168.2.1): Destination Host Unreachable
From fw (192.168.2.1): Destination Host Unreachable
--- 192.168.2.107 ping statistics ---
5 packets transmitted, 0 packets received, +3 errors, 100% packet loss
can anyone enlighten me as to what's going on - it all seems fine to
me from here... should be working right? Why is the card not
responding?
- dan.
At 10:04 PM +1100 30/8/00, Dan Horth wrote:
>ok - now I'm feeling a bit sheepish! I got donald becker's ne2k
>diagnostic utility and tried using it to check my card - which
>didn't come back with any promising results - after screwing around
>with a bunch of other stuff I decided to try some different io ports
>and found that the io listed in my conf.modules was infact incorrect
>- it's 0x260 not 0x300 as I previously had in there...
--
Nitro - 3D Visualisation, Graphics & Animation
Ph (+61 2) 9810 5177 - Fx (+61 2) 9810 0199
http://www.nitro.com.au/
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list