> I used the CD-Writing-HOWTO document to configure my HP
> 7200 CD-RW which now works flawlessly.  At first I
> thought I needed to reconfigure the kernel, but you
> just need to run a few modules like ide-scsi and add a
> few lines to your /etc/conf.modules like this:
> 
> #added as per CD-WRITING HOWTO
> 
>   alias   scd0 sr_mod                  # load sr_mod
> upon access of scd0

Just out of curiosity, what kernel is this? I have kernels 2.2.12-20 (RH
6.1) and 2.2.16-3 (updated RH 6.2), and they both have sr compiled into
the kernel. With sr in the kernel, that alias line would have no affect,
although it would not hurt anything either.

>   alias   scsi_hostadaptor ide-scsi    # SCSI host
> adaptor emulation
>   options ide-cd ignore=hdc            # if /dev/hdc is
> your CD-writer

Hmm... Again, the versions of RH 6.1 and 6.2 that I am using have ide-cd
compiled into the kernel, and I think conf.modules (modules.conf in RH
6.2) only will affect modules. If a kernel is being used that has ide-cd
compiled in, then I think you will need to put into lilo.conf:

append="hdc=ide-scsi"

And rerun /sbin/lilo.

> 
> You have to re-link /dev/cdrom to point to /dev/srX,
> and reconfigure any gui cd-rom drive short-cut icons
> accordingly.  That's basically about it.
>



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to