Without seeing the specifics of your configuration the best we can do is
guess. Some obvious things to check would be:
1) Make sure netmask on both machines match. If not you have different
broadcasts.
2) Make sure cabling is plugged in securely.
3) Ping the card in your linux box from the linux box that is the gateway
to the Win machine. Make sure it's responding properly.
4) Check your routing table to make sure it isn't convoluted. Linux
configure on my 6.1 box creates a real mess. In order to get both eth0
and eth1 to work I had to write a perl script to delete all the routes
linuxconf created and enter my own routes.
5) When you ping watch the hub lights to make sure it's working properly.
Maybe change ports in the hub.
Glen
>On Wed, 11 Oct 2000, Stephen King wrote:
>> Ok, I cannot figure this one out. I telnet into the linux box(192.168.0.4)
>> from my windoze machine(192.168.0.9) and from the telnet prompt try and ping
>> my windoze box(192.168.0.9). It kicks backing stating that the Destination
>> Unreachable. Then I go back to my windoze box(192.168.0.9) and ping the
>> linux box(192.168.0.4) and it works. After going back and forth a few times
>> the Linux box(192.168.0.4) is then able to get a ping response from the
>> windoze machine(192.168.0.9). What gives? I don't understand how it can just
>> start working all of a sudden.
>>
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list