I get messages like that on boot/shutdown... and they're often the same
exact lines. On my end, it's normal driver operation (I've read the
code)... but in your case.. <shrug> I just thought I'd let you know that
those kernel messages _can_ be normal in many cases :)
On Sun, 15 Oct 2000, Eddie Strohmier wrote:
> Hello:
>
> Does anyone know the meaning of this kernel message?
>
> kernel: eth0: setting RX mode to 0 addresses
>
> then the next line says:
>
> kernel: eth0: setting RX mode to 1 addresses.
>
> This is /var/log/messages. At the same time I had problems with the four
> machines on my dialup network recieving packets. I made some minor
> adjustments. Really nothing major just playing with sysctl.conf settings and
> several network restarts but to no avail. Only one of the my machines on my
> lanned network would pull packets. I did a warm reboot and still had
> problems. Only after I did a full shutdown, (power off) and reboot did I
> finally bring it back to the way it was but still after the network starts I
> see those kernel messages. Has anyone seen this before? I don't remember
> ever seeing this in my /var/log/messages in the past. I have IP masquerade
> running but only one machine could recieve the packets. This is on a RH 6.2
> machine running as a dialup server for 2 windoze and 2 RH 6.0 machines.
> Also I noticed some other wierd behavior. If I got this one machine to start
> pulling packets then I could get another to start pulling very slowly. Very
> wierd.
>
>
> Thanks in Advance,
>
> Eddie Strohmier
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
--
-Statux
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list