I have built a new kernel from the kernel-source-2.2.16-3.rpm using:
make oldconfig
make menuconfig
make dep
make clean
make install
make modules
make modules_install
cd pcmcia-cs-3.1.8
make config
make all
make install
The kernel boots just fine but the pcmcia modules have a few problems:
1. The were not installed int he /lib/modules/2.2.16-3/pcmcia
directory. I copied them from the pcmcia-cs-3.1.8 tree. No big deal
but indicated that I don't understand something.
2. The only modules built were :
cb_enabler.o ds.o i82365.o pcmcia_core.o tcic.o
no network modules built at all :-(
I have scoured the .config file and every option in make menuconfig but
see nothing relating to pcmcia. The pcmcia card itsactivated and the
link light comes on but I can't bring up eth0.
Any ideas what I am missing? The PCMCIA-HOWTO talks about some redhat
specific stuff but since I am installing from redhat rpms I assume it is
there.
All this is in preperation for a rebuild with the ipsec patched
installed.
btw here is are the kernel* packages I have installed.
[root@bretdell_linux pcmcia]# rpm -qa|grep kernel
kernel-ibcs-2.2.14-5.0
kernelcfg-0.5-5
kernel-doc-2.2.16-3
kernel-2.2.14-5.0
kernel-headers-2.2.16-3
kernel-source-2.2.16-3
kernel-utils-2.2.16-3
kernel-pcmcia-cs-2.2.16-3
hmm. no new ibcs I will do that and retry it but I doubt that is the
problem.
Any help greatly appreciated.
Bret
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list