Check out http://tomii.erols.com/firewall.txt for what I'm told is
a decent firewall... It is well commented.
> -----Original Message-----
> From: Nic Steussy [SMTP:[EMAIL PROTECTED]]
> Sent: Tuesday, October 24, 2000 7:48 PM
> To: [EMAIL PROTECTED]
> Subject: Re: >>>>>> iDSL LINUX PROXY<<<<<<<
>
> Jon,
>
> I am sympathetic. It can be a real trial getting something like that
> running.
>
> I start an IPCHAINS firewall from rc.local. (/etc/rc.d/rc.firewall). I
> set it up with the help of an excellent book called 'Linux Firewalls' by
> Ziegler. Then, in the firewall I have the statements:
>
> #
> --------------------------------------------------------------------------
> --
> # Masquerade internal traffic.
> # All internal traffic is masqueraded externally.
> ipchains -A forward -i $EXTERNAL_INTERFACE -s $LOCALNET_1 -j MASQ
> #
> #
> --------------------------------------------------------------------------
> --
> where LOCALNET_1 is the internal, non-routable TCP/IP net I run on my
> PCs, and EXTERNAL_INTERFACE is eth1, the NIC that connects to my DSL
> line.
>
> With this arrangement the Internet is seamlessly available to my
> internal 'net. I guess on-line games will involve letting a port
> directly through the firewall, but I have not experimented with that
> yet.
>
> Hope this helps.
>
> Best,
>
> Nic Steussy
>
>
> Jon Knews wrote:
> >
> > Hello,
> >
> > I have a Redhat Linux 6.0 kernel 2.2.5-15 box setup as follows and
> > I would like to know the best way to make it a seemless proxy for users
> > on their PC's.
> >
> > 198.93.11.12 192.168.100.2
> > 198.168.100.x
> > iDSL Pipeline Hub ----- eth1 LINUX eth0 ------ Ethernet Hub ====PC's
> >
> > I need browser, email smtp/pop, real audio/video, ftp, and telnet/ssh to
> > work from each PC. It currently works seemlessly from that Linux box
> > only. I currently have Squid setup and running so all the PC's can
> > access the internet with their browsers, but they need the proxy
> > settings, and I would like to make this seemless instead.
> >
> > I've read up on websites like http://ipmasq.cjb.net/ and
> > http://www.linuxdoc.org/HOWTO/IPCHAINS-HOWTO-3.html#ss3.1 and
> > http://web1.linuxhq.com/ldp/howto/IP-Masquerade-HOWTO-6.html#ss6.8 and
> > downloaded and installed ipmasqadm but am really getting totally
> > confused by the supposed helpful documentation, as to exactly which
> > IPCHAINS commands and parameters to execute from rc.local and also which
> > IPMASQADM commands and parameters, and so on. I've also experimented
> > with IP Forwading.
> >
> > Would any of you be able to tell be specifically all the statements I
> > would need to add to rc.local and whatever else, to make ip masquerading
> > work? I mean every SERVICE I would need to run to make this work, and
> > commands to put in, based on the diagram above? Also I would prefer
> > NOT to have to recompile the kernel if a solution is possible. Frankly
> > I don't even know what to call this, a proxy, firewall, or whatever.
> >
> > Many many thanks, in advance.
> > -Jon
> >
> > _______________________________________________
> > Redhat-list mailing list
> > [EMAIL PROTECTED]
> > https://listman.redhat.com/mailman/listinfo/redhat-list
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list