note: might the one being twice as fast have anything to do with the fact that BIOS has the same one set fast (160MB/s as opposed to 80MB/s)? :) I'm not a SCSI person.. but "SCSI" is just fun to pronounce :P -----Original Message----- From: Charles Galpin <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Friday, November 03, 2000 8:02 AM Subject: hdparam (was Re: Linux Network Performance Slower Than NT, pleasehelp) >Very interesting. This thread prompted me to test the buffered disk reads >on some of my machines. As expected, my pokey (but trusty) ide drive >system was slower than the scsi ones. But, what really surprised me was >the difference in beformance between my two scsi systems - one brnad new, >and the other not much more than a year old. > >"old" scsi setup: >adaptec 2940U2W >2 x 9GB IBM (?deskstar? DDRS-39130D) LVD drives >I'm pretty sure I have the bios set at 80MB/sec (verified w/ /proc/scsi/*) >Timing buffered disk reads: 12.85 MB/sec both disks > >new scsi system: >adaptec 29160 >1 x 18gb seagate ultra 160 (ST318436LW) >bios set for 160MB/sec tranfers >Timing buffered disk reads: 25.20 MB/sec > >The new system is *twice* as fast. buffer-cache reads are more comparable >though (but still better on the new). > >Now, it's been a long time since I've mucked with the "old" setup so I >don't remeber if the bios transfer rate can be set above 80 (I don't think >so), but I'm not getting anywhere near 80 anyway. > >I had expected the "old" setup to perfrom as well, or even outperform the >nw one. maybe I'm just showing my ignorance here? > >Does thsi look right? if not, how can I increase performance on the >"old" setup? > >tia >charles > >On Thu, 2 Nov 2000, Ronald W. Heiby wrote: >> Thursday, November 02, 2000, 2:21:36 PM, Jamin wrote: >> > As for your performance, you might want to check your HD settings with >> > "/sbin/hdparm". Unless you are using SCSI drives, you most likely don't >> > have the drives running with DMA enabled. This roughly doubled my >> > transfer rates. >> >> Wow, what a great suggestion! I ran the hdparm test on my drive and >> got about 3 Megabytes per second. Then, I turned on DMA for the drive >> and am getting about 11 with the same test! Subjectively, the system >> seems a lot "snappier", too. > > > >_______________________________________________ >Redhat-list mailing list >[EMAIL PROTECTED] >https://listman.redhat.com/mailman/listinfo/redhat-list > _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
