I am attaching XF86Config-4 with this email. Basically, if I run it at
1280x1024, then
it clones the same desktop on both the monitors. If I run it with
1024x768, the
image on the first monitor is wierd (looks like a vertical venetian
blind). In some
configuration screen one has a horizontal sync frequency of 85Hz and
screen 0 has
60Hz. I would like at least 75Hz on both the monitors. With the
current setup, it works fine. I do have '0=/usr/bin/X11/X :0 +xinerama'
in my gdm file
(where /usr/bin/X11/X is a symbolic link to XFree86, RH 7.0 seems to
have installed a
Version 3 XFree86 by default). I get the same behavior if I try startx
-- +xinerama.
I can email the log file if that would be helpful.
Thanks much
-S
Charles Galpin wrote:
>
> The only thing I can think of is to make sure you Screens section lists
> both monitors correctly, How about posting your XF86Config-4 for us to
> seee?
# XFree86 4.0 configuration generated by Xconfigurator
Section "ServerLayout"
Identifier "Dual Head"
Screen 0 "Screen 0"
Screen "Screen 0" LeftOf "Screen 1"
Screen 1 "Screen 1"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
# By default, Red Hat Linux 6.0 and later use xfs
Section "Files"
FontPath "unix/:7100"
EndSection
# This loads all the modules...
Section "Module"
Load "GLcore"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "pex5"
Load "record"
Load "xie"
Load "v4l"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "on"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "DELL P991"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30 - 107
VertRefresh 48 - 120
EndSection
Section "Device"
Identifier "G400_1"
Driver "mga"
BusID "PCI:1:0:0"
BoardName "Unknown"
Screen 0
EndSection
Section "Device"
Identifier "G400_2"
Driver "mga"
BusID "PCI:1:0:0"
BoardName "Unknown"
Screen 1
EndSection
Section "Screen"
Identifier "Screen 0"
Device "G400_1"
Monitor "DELL P991"
DefaultDepth 16
Subsection "Display"
Depth 16
# Modes "1280x1024" "1024x768"
Modes "1024x768"
EndSubSection
Subsection "Display"
Depth 24
# Modes "1280x1024" "1024x768"
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 1"
Device "G400_2"
Monitor "DELL P991"
DefaultDepth 16
Subsection "Display"
Depth 16
# Modes "1280x1024" "1024x768"
Modes "1024x768"
EndSubSection
Subsection "Display"
Depth 24
# Modes "1280x1024" "1024x768"
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
EndSection