On Thu, 11 Jan 2001, David Brett wrote:
> I ran into a problem with my computer yesterday. The hard drive filled
> up. I was unable to find out what caused this to happen. It cleared
> itself up when I started to close everything down and delete what files I
> knew was save.
>
> The one thing I did notice was the difference, df and du showed. One of
> them is out by a factor of 10. Why?
>
> df -h
> Filesystem Size Used Avail Use% Mounted on
> /dev/hda2 3.0G 1.9G 982M 67% /
>
> du -h
> ...
>
> 3.2G /
>
Are there additional filesystems besides /, like /home or /mnt for instance?
Unless told otherwise du will descend down multiple filesystems. Since the
disk in use is greater than your total space tha seems the most likely
explination? Eg:
bash# du -h /
[...]
5.4G /
bash# df -h /
Filesystem Size Used Avail Use% Mounted on
/dev/hda4 6.9G 4.6G 2.0G 70% /
5.4G vs 4.6G? Hmm... except...
bash df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hda4 6.9G 4.6G 2.0G 70% /
/dev/hda3 38M 9.8M 26M 27% /boot
/dev/hda1 2.0G 923M 1.1G 46% /mnt/nt
/dev/hda2 502M 48k 502M 0% /mnt/swap
... oh.. that's alright then. :)
M.
P.S. There's always a small amount of descrepency between df and du because
du is counting in blocks. Eg: a 1 byte file reports as 4k to du.
--
WebCentral Pty Ltd Australia's #1 Internet Web Hosting Company
Level 1, 96 Lytton Road. Network Operations - Systems Engineer
PO Box 4169, East Brisbane. phone: +61 7 3249 2583
Queensland, Australia. pgp key id: 0x900E515F
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list