I found the following modules for a Creative SB AWE32, with kernel 2.2.14-15: /sbin/modprobe sound; /sbin/modprobe isapnp; /sbin/modprobe joy-creative; /sbin/modprobe joystick; /sbin/modprobe snd-card-sbawe; /sbin/modprobe snd-midi; /sbin/modprobe snd-mpu401-uart; /sbin/modprobe snd-hwdep; /sbin/modprobe snd; /sbin/modprobe snd-pcm; /sbin/modprobe soundcore; /sbin/modprobe snd-sb16-csp; /sbin/modprobe snd-sb16-dsp; /sbin/modprobe snd-mixer; /sbin/modprobe snd-opl3; /sbin/modprobe snd-wavefront-synth; /sbin/modprobe awe_wave; /sbin/modprobe snd-hwdep; /sbin/modprobe snd-card-sbawe; /sbin/insmod opl3; /sbin/insmod sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x330; /sbin/insmod uart401 My sound worked perfectly with kernel 2.0.36. I have my CDROM connected to the IDE controller card. Every time I run sndconfig with(out) global $DISPLAY environment variable, as per instructions, I get the following errors: Don't know what to do with CONFIGURE CTL0044/941569 (LD 2 on or around line 353 /etc/isapnp.conf:353 -- Fatal - Error occurred parsing config file --- no action taken What must be done to fix this problem? Note: When you reply to this message, please include the mailing list/newsgroup address in Cc: and my email address in To:. ********************************************************************* Signed, SoloCDM _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list