well i am almost out of things to try.
maybe you could switch eth0 and eth1 and move the cables.
i think this is in the file /etc/modules.conf
--or--
try it with just one card to remove a chance of conflicts
get your internal network working and then move outwards.
i am assuming that client1 can ping client2.
what that other person said about adding other commands to your firewall is
true.
i see those martians all the time
----- Original Message -----
From: "Adahma" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, February 09, 2001 11:36 PM
Subject: Re: Routing problems (home network setup)
> On Fri, Feb 09, 2001 at 10:56:10PM -0500, Randy Perkins wrote:
> > did you see the message from the person who commented on all of your
errors
> > on eth1.
> > i think they might be on to something as far as eth1 not having the
correct
> > driver?
> > remember i am no expert and am just fumbling along with you.
>
> Yes, should be fine. Via-Rhine and Tulip, and that corresponds to
> when I have run them seperately in the past.
>
> > i will call your machine with redhat7 and 2 network cards the router.
> >
> > can you ping eth1 from the router machine?
>
> Yes.
>
> > can you ping eth1 from one of the client machines?
>
> Nope.
>
> > can you ping eth0 from one of the client machines?
>
> Nope.
>
> > can you ping an address on the internet from the router machine?
> > 209.1.8.14 will return a ping for me (sco.com)
>
> Yup, no problem.
>
> > on a side note, you're sure your not plugged into an uplink port on your
> > hub?
>
> Yup, double checked that.
>
> jdk
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
