"Mikkel L. Ellertson" <[EMAIL PROTECTED]> said:

> On 12 Feb 2001, Pete (Hawk) wrote:
> 
> > Hi
> >
> > I have just reinstalled Redhat 7.0 and done the upgrades and I'm
> > told I need a 2.4 kernel to get support for my UDMA 66 drives,..
> >
> > So I tried up dateing the kernel to 2.4 and it won't boot as it give
> > an error :  LABEL=/ invallid ext2 can't mount or something close
> >
> > So I pop of to look at my fstab to see whats up and find the following:
> >
> [snip]
> >
> > Whats with the LABEL thing does this not use /dev/hdc6 /home  etc any
> > more?
> >
> > And why is this a problem for the 2.4 kernel to mount
> >
> > Cheers
> > Pete
> >
> I am not sure why it is a problem with kernel 2.4.  Using LABEL instead
> of the device name for mounting ext2 partitions has been around for a
> while  (5.x?)  The old syntax also works.  The advantage of using LABEL
> is that the device can change without requiring change in /etc/fstab.
> This can be real handy with SCSI drives, where the device can change
> when you add another drive in the change.  If you have 3 drives, with
> IDs 0, 1 and 2, and the drive #2 (ID 1) dies, drive #3 changes from
> /dev/sdc to /dev/sdb.  For IDE drives, it is handy if you do something
> like move a drive from secondary master to primary slave...

Just a thought, but couldn't the "label" error in question refer to the label 
in "/etc/lilo.conf"?  

-- 
Mike Burger
CompuCom Information Services
http://www.compucomis.net
(215) 946-5573




_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to