Ben Ocean wrote:
> 
> Hi;
> I'm having a heck of a hard time configuring my tape drive. I have RH6.2
> and a SeaGate 20/40 LVD DDS-4. I ran this command:
>  >>>
> thewebsons:/dev# mt -f st0 rewind
> <<<
> and it gave me another command prompt so I guess it liked it. I presume
> that means RH knows the device is there, right? However, I ran these commands:

I would assume so to bit did the tape drive light come on?  


>  >>>
> thewebsons:/usr/lib/apache# tar -cvf /dev/st0 /apache
> tar: /dev/st0: Read-only file system
> tar: Error is not recoverable: exiting now
> thewebsons:/usr/lib/apache# tar -tvf /dev/st0
> tar: Read error on /dev/st0: Input/output error
> tar: At beginning of tape, quitting now
> tar: Error is not recoverable: exiting now
> <<<
> and as you can see, no luck. So, then I got to wondering if all I need to
> do is format the tape. But apparently you can't do that in Linux?! Where do
> I go from here?
>

What do the perms on the tape device look like?

what does 
mt -f /dev/st0 status 
return?


Bret



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to