You installed it to hda3? You need like.. 2 or 3 partitions tho. hda3 is
only one... plus it's a primary partition. What's on hda1? Then there's
the question of which one is marked active since you can only have one
active at a time (between 1 and 4 since they are the primaries).
If you did a fresh install to a blank drive then you shouldn't be having
problems (and you should be using hda1 for /boot, and hda5+ for
everything else). If you reinstalled (over an existing installation) then
you might not be changing anything in /etc/passwd at all... but you
said you replaced the drive so the drive should be empty, etc.
I'm just trying to spark some thoughts.. that's all.
On Mon, 2 Apr 2001, Jerry Human wrote:
> I have a real problem. I replaced hda with a new bigger hard drive and
> installed RH 7.0 Respin from CD at hda3 with a boot disk. However, after
> the install reboot, it won't allow any logins. I've reinstalled four
> times (this happened once on the old drive and a reinstall fixed it) and
> it still won't allow any logins. Even booting from floppy or rescue
> doesn't work. It just keeps repeating the login prompt. What can I do?
>
> Thanks.
>
>
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
>
--
-Statux
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list