|
line vty 0 ? this will show how many vty lines you
have most have 5. If so, type the following:
line vty 0 4
login
password password.
Do all this in global config. (config
t)
----- Original Message -----
Sent: Wednesday, April 18, 2001 10:46
AM
Subject: cisco password
Hi,
I managed to change the password for cisco switch
by using the command:
enable password password
but no how do i change the password for telnet. I
mean when i telnet to cisco switch it asks for a password. That is not
privileged one.
kapil
----- Original Message -----
Sent: Wednesday, April 18, 2001 2:30
PM
Subject: Password
Sorry, do
you no the password? it's really easy if you do.
1.) >From your
PC telnet into the router and login into the switch.
2.) Make
sure you are at the prive prompt, not user mode.
3.) And it
really depends what type on ISO you have, you can have the SET
commands
or Cisco ISO like router command line.
set password
or enable secret password
Then it will verify the
passwords and before you get out, establish another
telnet session to
make sure your new passwords work, while you have the other
still login
just in case you password change did not work for some reason.
|
