Hello all,
This is my first attempt at contributing to this list, so please forgive me
if I sound stupid (a little)


I have been trying to configure an Alcatel USB modem for the last three
weeks using the method
by Chris Jones on the internet.
So far, I lost half my hair, and I have not got any fingure nails left. I
beg you to help me please.

Environment:
RedHat 7.1 - Kernel 2.4.2
Toshiba Laptop 4230 CDT
Alcatel USB SpeedTouch Modem


I have already done the following:

1 - Reconfigure the Kernel, and patched it with the (pppoatm-1) and the
(speedtouch-2.4.1-patch) with (sarlib-0.2.1)

The result of patching has been ascertained using the --dry-run method
suggested by Mr. Jones on the linuxdude site,
and no errors resulted. so I assume that the patching has been successful.

2 - Make dep-clean-bzImage-modules-modules_install_install as normal.
Adjusted lilo.conf accordingly.

The result of the process is successful because when I do uname -a I get the
newer version of the kernel.

3 - Configured the Kernel with atm and Alcatel modem enabled, and so on,
please note that all
     configs were as built in except for the (UHCI/OHCI support and Alcatel
Speedtouch USB support). which are better left as modules.

4 - Installed Alcatel's speed managenet binary.

5 - Installed a ppp-2.4.1b2.tar.gz as a daemon, in place of the
ppp-2.4.0-2.i386.rpm version which gave a "atm.h" file not found.
     and complained that the file pppoatm.so in the directory <<<<
/lib/modules/Linux-2.4.2/pppd/plugins >>>> is missing and later on
     I get an error complaining that the
<<<<</usr/lib/modules/pppd/plugins/pppoatm.so>>>> is missing

6 - I did not need to create the file /dev/ppp because it was already there,
(please note that the file size is 0 bytes)

7 - Edited /etc/ppp/options to make is exactly the same as Mr. Jones
suggested on the site.

8 - Modified Chap-Secrets and Pap-Secrets files by entering my username/pass
pair.

9 - Loaded the usb-uhci and speedtch modules.

10 - Mounted as in mount none /proc/bus/usb -tusbdevfs

11 - Started the management application as in /usr/sbin/mgmt.

12 - Plugged the modem.

Here is the output in var/log/messages:

May 4 02:49:25 laptop pppd[1025]: /usr/lib/pppd/plugins/pppoatm.so: cannot
open shared object file: No such file or directory
May 4 02:49:25 laptop pppd[1025]: Couldn't load plugin
/usr/lib/pppd/plugins/pppoatm.so
May 4 05:03:13 laptop kernel: usb.c: registered new driver Alcatel
SpeedTouch USB
May 4 05:04:41 laptop Speedmgmt[1849]: Alcatel SpeedTouch USB Management
daemon started.
May 4 05:04:41 laptop Speedmgmt[1849]: (C) Alcatel 2001, Version 1.3.1
May 4 05:04:41 laptop Speedmgmt[1849]: bulk_write: Invalid argument
May 4 05:04:41 laptop Speedmgmt[1849]: bulk_read: Invalid argument
May 4 05:04:41 laptop Speedmgmt[1849]: bulk_write: Invalid argument
May 4 05:04:41 laptop Speedmgmt[1849]: bulk_read: Invalid argument
May 4 05:04:42 laptop Speedmgmt[1849]: USBDEVFS_SUBMITURB: Invalid argument
May 4 05:05:14 laptop kernel: hub.c: USB new device connect on bus1/1,
assigned device number 2
May 4 05:05:14 laptop /etc/hotplug/usb.agent: ... no drivers for USB product
6b9/4061/0
* Please note that when I installed the ppp ppp-2.4.0-2 package, I had an
error complaining about this file too as well as the atm.h file.
I looked in /lib/modules but there is no pppd directory. can you please help
me?

Thanks in advance.

William Shark




_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to