If I do a mt -f /dev/nst0 rewind if get an Input/output error. I did a more of /dev/st0 and got this error
st0: Error 26030000 (sugg, bt 0x20, driver bt 0x6, host bt 0x3). Has anybody seen this before? I researched online and found similar error messages but no solution. Thanks for your help, Chris -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Keith Morse Sent: Wednesday, November 21, 2001 2:18 PM To: [EMAIL PROTECTED] Subject: RE: 7.1 not finding new hardware On Wed, 21 Nov 2001, Christopher Rowe wrote: > The problem is that kudzu is not coming up at all. It gets to checking > new hardware in the boot up list and then checks "ok" and never brings > up the configuration utility. Basically saying it didn't see anything > new. Could there be something in the bios that would prevent the > configuration utility from coming up? One suggestion is to try "mt" to see if the drive can be accessed. Generally speaking the first tape drive will be /dev/st0 and sometimes you'll find a symbolic link from /dev/st0 to /dev/tape. _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list