On Thu, 22 Nov 2001, Jose Celestino wrote: > Date: Thu, 22 Nov 2001 01:05:43 +0000 > From: Jose Celestino <[EMAIL PROTECTED]> > Reply-To: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Subject: cpqarray.o and RedHat 7.2 install > > Hi, > > I recently had a strange happening when trying to install RedHat 7.2 on a > CompaqProliant DL580 with a SmartArray2 controller with three 9Gb UW3 SCSI > disks, with 2 -> raid1 and the remaining -> raid0; fdisk showed me both > logical drives as having just 1 cylinder. > > I vampirised the machine for a while until I realized this wasn't a > hardware problem. I went to install RedHat 7.1 and all went out fine. > > Has any of you had any similar problem with cpqarray.o, RedHat 7.2 > install and one cylinder drives ? Yes, I have seen that problem with Roswell beta (and 7.2, as well) on Prosignia 500 with Smart2/P controller; fdisk from earlier RHL version (we tried from RHL6.2) worked fine.
So my colleague who installed Roswell (or Roswell2) and then RHL 7.2 on that machine, and who wanted fdisk to control where each filesystem is located, mounted a floppy containing fdisk from RHL 6.2 during install and used it to setup partitions. > > -- > Jose Celestino <[EMAIL PROTECTED]> > --------------------------------- > Dyslexics retyping hosts file on servers > Best regards, Wojtek _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
