Need some help with a scsi tape
drive. Installed a Seagate Python on a Redhat 7.1 server. The tape drive was pulled over from an
older 6.2 server. The system seems
to see it fine and the tape is shown in the /proc/scsi/0
file. At first the tape was just
hanging when I tried to rewind in or back up to it. It was giving me the error “device
is busy” and in a reboot of the server the /tmp would fail to
dismount. If I do a more
on the /dev/st0 I get st0: Error 26030000 (sugg, bt
0x20, driver bt 0x6, host bt 0x3). Has anybody seen this before. I would really appreciate any help on
this. Thanks, |