Hello Fellows!

I need some help... when I use the "mt -f /dev/rmt/0cbn offline" command
and the device is not plugged to the data cable it hangs and there is no
kill that will terminate the the process other than a reset of the
workstation. Before someone tells me to connect the device.. I work
testing tape backup drives, 24 drives are tested at once and if one has
a bad interface card, the same as having the cable disconnected, the
device will hang until the next reset. I tried resetting the device card
via an utility provided by the vendor. In the messages log I see how the
card resets and comes online again, but the kernel will not release the
device, keep getting device busy when trying to access the device. If I
close the xterm where I ran the command the PPID changes to 1. Does
anyone knows of a way to stop this type of command? Why don't I get a
drive not present or I/O error message? By the way the device type is
fibre channel.

Enlighten me please...

Pablo L. Robles




_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to