Do a route command; I place it in rc.local. route add default gw aaa.bbb.ccc.ddd Works fine, do it all the time on both single-homed and multi-homed machines. I use it to add redundancy in my outbound links which go to multiple routers connected to multiple T-1's; NIC, router, and line problems are not noticed by my client base since data still flows in and out even if one of these components fail. - rick warner On Wed, 9 Jan 2002, James Pifer wrote: > I'm trying to replace an NT server with Redhat 7.2. The problem is that the > current environment has to be multi-netted on one NIC, hence two gateways. > Another source told me this couldn't be done on linux. > > Currently the NT server has several IP addresses(from two subnets) with TWO > default gateways. On NT 4 this is setup in TCPIP Advanced Properties. > There's a section for additional IP's and and another for additional > gateways. Assign them and it works. > > For example: (this first address is the main address, the rest are virtual) > 192.168.1.10 mask 255.255.255.0 gateway 192.168.1.1 > 192.168.1.11 mask 255.255.255.0 gateway 192.168.1.1 > 192.168.20.25 mask 255.255.255.0 gateway 192.168.1.20 > 192.168.20.26 mask 255.255.255.0 gateway 192.168.1.20 > > I can add virtual IP's without a problem, but how do I deal with the > gateways? I'll be very disappointed with Redhat(linux) if I can't get this > done. Can I do it by messing with the routing table? If so, what would the > syntax of the route adds be? > > PLEASE HELP! > > Thanks. > James > > > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list > _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list