Unfortunately we have a lot of hardware (older NCD HMX terminals and so
on) that do not support DHCP so we will have to go with BootP on this
project. Before I go any further, does anyone have a version of BootP
that will work with xinetd? I downloaded the bootp-2.4.3-7 files but I
thought I'd check and see if anyone had what I was looking for before
proceeding much further. Thanks again for all of your help.
Chad and Doria Skinner wrote:
>
> I don't know if this will help, but on my home network I have entries
> similar to the following in my dhcpd.conf file so that my computers always
> have the same ip:
>
> host rigel {
> hardware ethernet 00:00:00:00:00:00;
> fixed-address 192.168.1.1;
> }
>
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Janyne Kizer
> > Sent: Tuesday, February 12, 2002 3:55 PM
> > To: [EMAIL PROTECTED]
> > Subject: Re: bootp question
> >
> >
> > So DHCP is backward compatable with Bootp, right? I'll test, of course,
> > but we have some older diskless workstations that we are serving
> > addresses to. Thanks!
> >
> > Ragnar Wisl�ff wrote:
> > >
> > > Sitat Janyne Kizer <[EMAIL PROTECTED]>:
> > >
> > > > Was bootp depreciated in favor of dhcp? I know that it has not
> > > > shipped
> > > > since about RH6 but I was curious. We have some very old systems
> > > > using
> > > > bootp and we could just copy the bootptab over when we drop in new
> > > > systems if we stayed with that but if bootp has, in fact, been
> > > > depreciated (as i suspect it has) then maybe that's not such a good
> > > > idea. Just trying to weigh our options. Thanks!
> > >
> > > The main benefit from dhcp was to assign ip's dynamically from a range,
> > > bootp was a one-to-one MAC to ip system, I think. You should be able to
> > > get dhcp to do all bootp could. On modern RHL systems you'll have to
> > > compile and install bootp from source. The rpms (last one from 5.1) want
> > > inetd.
> > >
> > > --
> > > Mvh Ragnar Wisl�ff
> > > ------------------
> > > life is a reach. then you gybe.
> > >
> > > _______________________________________________
> > > Redhat-list mailing list
> > > [EMAIL PROTECTED]
> > > https://listman.redhat.com/mailman/listinfo/redhat-list
> >
> > --
> >
> > Janyne Kizer
> > CNE-3, CNE-4, CNE-5
> > Systems Programmer Administrator I
> > NC State University, College of Agriculture & Life Sciences
> > Extension and Administrative Technology Services
> > Phone: (919) 515-3609
> >
> >
> >
> > _______________________________________________
> > Redhat-list mailing list
> > [EMAIL PROTECTED]
> > https://listman.redhat.com/mailman/listinfo/redhat-list
>
> _______________________________________________
> Redhat-list mailing list
> [EMAIL PROTECTED]
> https://listman.redhat.com/mailman/listinfo/redhat-list
--
Janyne Kizer
CNE-3, CNE-4, CNE-5
Systems Programmer Administrator I
NC State University, College of Agriculture & Life Sciences
Extension and Administrative Technology Services
Phone: (919) 515-3609
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list