I posted this problem before and received an answer direct by email. Since then I have been asked by three other SIS board owners for help on the same problem. I am reposting with the apparent solution so others (including the RedHat people) may be aware of the problem and one solution.
When starting a RH 7.2 install on a SIS board system, hitting the 'enter' key for a gui install will (on some systems, not all) show a number of errors and lock up. The install can be done if instead of hitting the 'enter' key , typing "linux mem=64m". I had three identical 800MHz Athlon SIS machines with 128MB of memory and two of them installed by using the 'enter' key only, but the third needed the above procedure. "linux mem=128m" did not work, but using "linux mem=64m" did - perhaps because 32m is used for the graphics board. bruce _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list