Hello,
I am new to the mailing list and I'm not sure if this is the correct
group but if not can someone let me know what group I should subscribe
to thanks.
The problem I have is I am getting the following message when I type
dmesg
(ips0) Resetting controller.
(ips0) Resetting controller.
(ips0) Resetting controller.
(ips0) Resetting controller.
(ips0) Resetting controller.
(ips0) Resetting controller.
(ips0) Resetting controller.
(ips0) Resetting controller.
Is there something wrong with the raid controller?
Here are the hardware and software specs:
IBM Netfinity 5600 server
REDHAT 7.2
SCSI subsystem driver Revision: 1.00
(scsi0) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 1/3/0
(scsi0) Wide Channel A, SCSI ID=7, 32/255 SCBs
(scsi0) Downloading sequencer code... 393 instructions downloaded
(scsi1) <Adaptec AIC-7896/7 Ultra2 SCSI host adapter> found at PCI 1/3/1
(scsi1) Wide Channel B, SCSI ID=7, 32/255 SCBs
(scsi1) Downloading sequencer code... 393 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.4/5.2.0
<Adaptec AIC-7896/7 Ultra2 SCSI host adapter>
Vendor: SEAGATE Model: DAT 06240-XXX Rev: 8110
Type: Sequential-Access ANSI SCSI revision: 03
scsi2 : IBM PCI ServeRAID 4.72.00 <ServeRAID 4L>
Vendor: IBM Model: SERVERAID Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 01
Vendor: IBM Model: SERVERAID Rev: 1.0
Type: Processor ANSI SCSI revision: 01
Vendor: IBM Model: CaHv3 S2 Rev: 0
Type: Processor ANSI SCSI revision: 02
Thanks
Mike
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list