--- Gordon Messmer <[EMAIL PROTECTED]> wrote: > On Sun, 2002-06-09 at 16:41, Avi Aumick wrote: > > > > Problem 1: > > after upgrading to 7.3 I keep getting the following log message > on the > > server (still running 7.2) > > > > Jun 9 17:02:14 hostname kernel: Packet log: input DENY eth1 > PROTO=17 > > xxx.xxx.xxx.xxx:138 yyy.yyy.yyy.255:138 L=241 S=0x00 I=0 F=0x4000 > T=64 > > (#45) > > > > xxx.xxx.xxx.xxx is the server ip address > > Probably coincidence that this happened when you upgraded the > clients. > xxx.xxx.xxx.xxx is the source address on the packet that was > filtered. > If that's your server, then you're likely running Samba on that > server, > and it's sending out broadcast packets to find out what other samba > servers are in the network. Either turn off smbd, or stop > filtering > ports 138 and 137. > > > > Problem 2: > > Also after upgrading my clients to 7.3, neither of the client > pc's are > > able to print. On one client I did a brand new install, on the > other I did > > an upgrade. I am not using cups. The printer is a remote printer > to the > > clients having its own ip address. I can not even print from the > > printtool. > > This appears to be a bug in LPRng in 7.3. Bugzilla ID is 63860. > Try > reverting LPRng to the version distributed with 7.2 and see if that > resolves the problem. >
or just use cups - had similar problem - cups works fine > > > _______________________________________________ > Redhat-list mailing list > [EMAIL PROTECTED] > https://listman.redhat.com/mailman/listinfo/redhat-list __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
