Mike Burger wrote:
> Like I said, ifconfig:
You need to follow the thread and read my other posts. The card isn't there yet.
It needs to be configured. The system does not SEE it. ifconfig does me no good
without the card being recognized and loaded. And modprobing the module results in
errors because it's not finding the card. So I needed to find the card's physical
configuration, and if needed, change it.
This is a moot point now since I found the tools to do it at
http://www.scyld.com/diag/ and the card is now up and running. It was configured as
0x210 with IRQ 10, and the module wasn't finding it. Changing it to 0x300, same IRQ
works. Last I checked, ifconfig was not able to change NIC parameters (something I
said over and over again, I need to find out what they are AND/OR CHANGE them).
--
H | "Life is the art of drawing without an eraser." - John Gardner
+--------------------------------------------------------------------
Ashley M. Kirchner <mailto:[EMAIL PROTECTED]> . 303.442.6410 x130
Director of Internet Operations / SysAdmin . 800.441.3873 x130
Photo Craft Laboratories, Inc. . 3550 Arapahoe Ave, #6
http://www.pcraft.com ..... . . . Boulder, CO 80303, U.S.A.
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list