-----Original Message-----
From: Jayson Hill <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Tuesday, July 16, 2002 5:47 PM
Subject: installing a SCSI tape drive...


>Was wondering if someone help me to install a SCSI tape drive on RedHat
>7.2
>
>It is a Seagate Travan tape drive. Not sure exactly how to do it. Any
>help would be much appreciated.
>

Go ahead and physically install the drive, linux will see it at boot in most
cases.  To use it, just refer to the various scsi tape interfaces.  For
example,  /dev/nst0 is the non-rewinding scsi tape drive interface for the
first tape drive.  /dev/st0 is the rewinding scsi tape drive interface for
the first tape drive.   There is a bunch of software out there that manages
back ups nicely that can handily use such a drive.  Amanda comes to mind..
Hope this helped.  Check the man pages on "mt"  it will refer you around,
and explain tape drives a bit.  man "st" is a bit of heavy reading, but is
specific on how scsi tape drives are used.

Jeff Hogg



_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list

Reply via email to