On Mon, 2002-07-22 at 13:45, Christensen Tom wrote: > I would go to www.nvidia.com, and download their drivers for the card > they have good linux support > simply click on the download drivers link on the homepage > and select linux, they have documentation on how to get it up and running > Tom
Just make sure you have the kernel source installed. A quick Guide: -------------- Its really pretty easy, just down load the src rpms, then: rpm --rebuild NVIDIA_kernel-version.src.rpm rpm -Uvh /usr/src/redhat/RPMS/i386/NVIDIA_kernel-version.i386.rpm same for the GLX drivers. edit the following file: /etc/X11/XF86Config-4 and remove any referance to: Load "glcore" Load "dri" and make sure you have Load "glx" (other wise no 3D acceleration) in the modules section near the top. where it mentions you're card, change the driver to read "nvidia" also around the bottom remove any reference to DRI, as this clashes with Nvidia's own drivers. Also if depending upon what card driver toyu want to load add the following option to the Monitor section: Load "NvAGP" "1" # Nvidia Driver ( I use this one) or Load "NvagP" "3" # try internal kernel driver, then Nvidia (I think) If it doesn't work check out the XFree86 log: /var/log/XFree86.0.log( I think) and also run (to get the status of you're card & drivers): cat /proc/driver/nvidia/cards/0 # Find out what you're card is cat /proc/driver/nvidia/agp/status # See what drivers it using Hope that helps Mark -- --- To steal ideas from one person is plagiarism; to steal from many is research. _______________________________________________ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
