As a few people have mentioned, you _can_ install and run Win2k on a
non-primary drive, likewise linux, and many other Win version. The key word
there though was _install_.
Modern OSs i.e. Win2K, linux, don't use the bios to talk to the disks once
they are loaded, they talk directly to the hardware. This means that they
have to run on the drive they were installed on, since they _know_ (registry
settings, /etc/fstab, etc.) what physical drive they are on. If you move the
drive, you will need to update this config set, or you will get problems.
The LI message means that the lilo first stage loader has loaded (from the
MBR/bootsector) but it cannot find the second stage loader (since you have
moved the drives around).
Win2K give NTLDR not found because it is looking for it on the primary HD,
when it is on the second drive.
Try putting ONLY the Win2K drive in as the primary. If you get the LI
message, then it means that you have managed to munge the MBR of that disk,
and you could be in for a fun ride....
The best way to get 2K to run on the second drive will be to reinstall it
from scratch. If you are happy to let it be on the primary, the following
will (probably) work.
1) get the linux disk as had
2) build a kernel-only boot disk with the root device set correctly (use
rdev)
3) Check that this boots OK.
4) Use rdev to change the root device for the boot disk to the same
partition number on the second disk name (hdb or hdc whichever you are
planning to use)
5) Move this disk to the second slot (hdb or hdc as you picked)
6) boot from the floppy - you _WILL_ get fsck failures
7) enter the root password, remount / readwrite
mount / -orw,remount
8) edit /etc/fstab changing the drive name in every occurrence
9) edit /etc/lilo.conf likewise
10) rerun lilo
11) system should boot, now, with AND without the floppy
12) install the 2k disk as primary
12) boot from floppy (hd won't work)
13) edit lilo.conf again, to install onto had, but with the linux stuff on
hd[b|c], add the win2k option on had
14) rerun lilo
15 boot without the floppy - you're done.
Your mileage may very
No guarantees
You _DO_ have a backup, don't you?
Whoever said that computer's made things easy?
I'm starting to feel like roadkill on the information superhighway
Seriously, though... make sure that you understand what I meant by each of
the above steps before you start. If you don't, then feel free to ask. I'm
typing this before my first coffee of the day, so I'm not sure how much
sense it will make.
And good luck :)
Jim
-----Original Message-----
From: script this [mailto:[EMAIL PROTECTED]]
Sent: 28 July 2002 16:29
To: [EMAIL PROTECTED]
Subject: please..anyone dual boot linux w2k frustrations
scenario:
running redhat linux 7.2 for over a year on
preinstalled hd. purchased second drive with w2k
preinstalled. hooked up second drive as secondary ide
drive (hdb), kept primary drive with linux as hda.
problem:
w2k will not boot at all.
all things i've tried:
1. lilo.conf:
prompt
timeout=80
default=linux
boot=/dev/hda
map=/boot/map
install=/boot/boot.b
message=/boot/message
linear
verbose=2
image=/boot/vmlinuz-2.4.7-10
label=linux
initrd=/boot/initrd-2.4.7-10.img
read-only
root=/dev/hda2
append="hdd=ide-scsi"
other=/dev/hdb1
label=win
result: Loading win
but nothing happens
2. lilo.conf changes:
added 5 lines (indicated by > ) to other:
other=/dev/hdb1
> optional
label=win
> map-drive = 0x80
> to = 0x81
> map-drive = 0x81
> to = 0x80
result: NTLDR not found
3. lilo.conf changes
replaced
map-drive = 0x80
to 0x81
map-drive = 0x81
to 0x80
with
loader=/boot/os2_d.b
result: disk read error
4. lilo.conf change
replaced:
linear with lba32
result: same as #3 (disk read error)
5. made the windows drive the ONLY (primary) drive on
the cable
result????
after finding boot record, the following is printed to
screen:
LI
and it hangs there forever....
I've tried changing jumper settings - the hard drive
is 100g (my bios won't recognize the entire hard
drive, so I have to use alternate jumpber
settings...)....but no setting seem to work.
Does ANYONE know what this LI means?
Please, any help would be tremendously appreciated....
Thanks in advance
__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs SkyScan
service. For more information on a proactive anti-virus service working
around the clock, around the globe, visit http://www.messagelabs.com
________________________________________________________________________
This E-Mail is sent in confidence for the addressee only. Unauthorised recipients
must preserve this confidentiality and should please advise the sender immediately by
telephone (+44 (0)870 241 6492) and return the original E-Mail to the sender without
taking a copy. Cyprotex has taken all reasonable precautions to ensure that no viruses
are transmitted from Cyprotex to any third party. Cyprotex accepts no responsibility
for any loss or damage resulting directly or indirectly from the use of this E-Mail or
the contents.
_______________________________________________
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list