Check if the boot device SCSI point to your SCSI Hard Disk. For this, look at the setup for the Adaptec (CTRL+A during bootup).
This will solve your problem. ------------------------------------------ On Tue, 17 Sep 2002 16:31:19 +0530 Santhosh <[EMAIL PROTECTED]> wrote: > Hi, > Check your BIOS first Bootup Device. > > Santhosh. > > > > On Tuesday 17 September 2002 03:34 pm, Leandro J. Kohler wrote: > > Hi, > > > > Here is the error message: > > > > Searching for boot record from SCSI.... Not found > > > > Thanks, > > > > Leandro J. Kohler > > > > > > -----Mensagem original----- > > De: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED]]Em nome de Toralf Lund > > Enviada em: segunda-feira, 16 de setembro de 2002 11:08 > > Para: [EMAIL PROTECTED] > > Assunto: Re: Problem on boot after RH 7.3 installation completed on > > AMD K6-II and Adaptec SCSI card > > > > > Hi, > > > > > > I have just finished installing Red Hat 7.3 on computer (AMD K6 II > > > 833 processor and SCSI card Adaptec 29160 with hd 9.1 GB). > > > > > > The installation was completed, but we can't boot it now. > > > > > > It seems that it can't find the operation system... > > > > > > I had tried using both, LILO and GRUB. The same problem. > > > > > > But I can boot it using a floppy boot disk created during the > > > installation. > > > How could I find the problem ? > > > > Does the LILO/GRUB boot screen show up at all? And how about the > > info/device search page for the SCSI card? If these aren't there, > > the problem is probably with the BIOS. Make sure you have the latest > > firmware(flash if necessary!), and that BIOS settings allow SCSI > > boot. > > > > If you do get the LILO or GRUB screen, send us any error messages, > > info on portioning layout etc. > > > > Also, what mainboard are you using? > > > > - Toralf > > > > -- > redhat-list mailing list > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/redhat-list > -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
