On Tue, 2002-10-01 at 17:39, Javier Gostling wrote:
...
> which is expected. Now, when I rebooted to apply the kernel upgrade, the
> system hung on startup with the new kernel. After some investigation, I
> found that the linuxrc script in the initrd image for 2.4.9-34smp was
> getting an error when mounting the root filesystem, hence pivot_root
> failed and init could not run (hang). The specific message is:
>
> mount: error 6 mounting ext3
...
> Btw, the machine is a Compaq ProLiant DL380, dual P-III 733 MHz, 512 Mb.
> Ram. The disk system is comprised of a Compaq SmartArray 431 RAID
> controller, with two 9 Gb hot plug SCSI hard drives in RAID 1 (HW RAID).
> There is also an on-borad NIC (3-com) and 3 add-on NICs (intel
> eepro100).
It's a kernel bug. Change your grub.conf to use:
root=3003
where 3003 is the hex value of the root device's major and minor number.
In our case, the root device is on /dev/rd/c0d0p3, it's major and minor
numbers are 48 and 3:
# ls -l /dev/rd/c0d0p3
brw-rw---- 1 root disk 48, 3 Apr 11 07:25 /dev/rd/c0d0p3
Decimal 48 is hex 30; decimal 3 is hex 3, so "3003" is the root device.
Adjust values to suit your own install.
Early kernels in 7.3 also had this problem, but the latest errata
included a fix (a missing patch, apparently).
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list