Hello Willem (and all), Thanks for your advice, but the bad news is that I'm already running the SMP kernel, that is the strange part:
[root@streamer /root]# cat /etc/redhat-release Red Hat Linux release 7.1 (Seawolf) [root@streamer /root]# uname -a Linux streamer.et.telecom.com.ar 2.4.18-17.7.xsmp #1 SMP Tue Oct 8 12:37:04 EDT 2002 i686 unknown [root@streamer /root]# rpm -qa | grep kernel kernel-headers-2.4.9-34 kernel-smp-2.4.18-17.7.x kernel-smp-2.4.2-2 kernel-2.4.2-2 kernel-2.4.9-34 kernel-2.4.18-17.7.x kernel-doc-2.4.18-17.7.x kernel-source-2.4.18-17.7.x kernel-smp-2.4.9-34 [root@streamer /root]# cat /etc/lilo.conf boot=/dev/sda map=/boot/map install=/boot/boot.b prompt timeout=50 message=/boot/message linear default=linux image=/boot/vmlinuz-2.4.9-34smp label=linux.bak initrd=/boot/initrd-2.4.9-34smp.img read-only root=/dev/sda2 image=/boot/vmlinuz-2.4.2-2 label=linux-smp initrd=/boot/initrd-2.4.2-2.img append="nousb" read-only root=/dev/sda2 image=/boot/vmlinuz-2.4.18-17.7.x label=linux-up root=/dev/sda2 read-only initrd=/boot/initrd-2.4.18-17.7.x.img image=/boot/vmlinuz-2.4.18-17.7.xsmp label=linux root=/dev/sda2 read-only initrd=/boot/initrd-2.4.18-17.7.xsmp.img As you may infer by reading at my lilo.conf, I'm struggling with this one since some time ago... :) Thanks again, I appreciate your help cl. Destinatarios: Claudio Lapidus <[EMAIL PROTECTED]> CC: [EMAIL PROTECTED] Asunto: Re: RH7.1 doesn't recognize SMP system Clasificación: I seem to recall having to install the smp rpm by hand on an ibm netfinity box when installing 7.1. Then one has to change lilo.conf and rerun lilo to load the correct kernel. Then do dmesg to see if it worked. hth Willem On Tue, 22 Oct 2002, Claudio Lapidus wrote: > Hello, > > I have an old Proliant 6000 (2-way Pentium II) from about 1998, currently > is running RedHat 7.1 (last fixes and all), but it is unable to correctly > detect the SMP motherboard. Follows relevant kernel output: > > [root@streamer /root]# cat /proc/cpuinfo > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 5 > model name : Pentium II (Deschutes) > stepping : 3 > cpu MHz : 400.017 > cache size : 512 KB > Physical processor ID : 0 > Number of siblings : 1 > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr > bogomips : 793.16 > > [root@streamer /root]# dmesg > Linux version 2.4.18-17.7.xsmp ([EMAIL PROTECTED]) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-112)) #1 SMP Tue Oct 8 12:37:04 > EDT 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) > BIOS-e820: 000000001fffc000 - 0000000020000000 (ACPI data) > BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 511MB LOWMEM available. > On node 0 totalpages: 131068 > zone(0): 4096 pages. > zone(1): 126972 pages. > zone(2): 0 pages. > Kernel command line: auto BOOT_IMAGE=linux ro root=802 BOOT_FILE=/boot/vmlinuz-2.4.18-17.7.xsmp > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > Initializing CPU#0 > Detected 400.017 MHz processor. > Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized > Console: colour VGA+ 80x25 > Calibrating delay loop... 793.16 BogoMIPS > Memory: 511124k/524272k available (1280k kernel code, 10584k reserved, 1051k data, 188k init, 0k highmem) > Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) > Inode cache hash table entries: 32768 (order: 6, 262144 bytes) > Mount cache hash table entries: 8192 (order: 4, 65536 bytes) > ramfs: mounted with options: <defaults> > ramfs: max_pages=64162 max_file_pages=0 max_inodes=0 max_dentries=64162 > Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) > Page-cache hash table entries: 131072 (order: 7, 524288 bytes) > CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 512K > CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 > CPU: Common caps: 0183fbff 00000000 00000000 00000000 > Enabling fast FPU save and restore... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) > mtrr: detected mtrr type: Intel > CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 512K > CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 > Intel machine check reporting enabled on CPU#0. > CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 > CPU: Common caps: 0183fbff 00000000 00000000 00000000 > CPU0: Intel Pentium II (Deschutes) stepping 03 > per-CPU timeslice cutoff: 1460.51 usecs. > task migration cache decay timeout: 1 msecs. > SMP motherboard not detected. > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 399.1893 MHz. > ..... host bus clock speed is 99.1937 MHz. > cpu: 0, clocks: 195284, slice: 97642 > CPU0<T0:195280,T1:97632,D:6,S:97642,C:195284> > migration_task 0 on cpu=0 > PCI: PCI BIOS revision 2.10 entry at 0xf0070, last bus=14 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > ... > ---------(rest of output supressed)------------- > > So, no reference to CPU#1. Even there is a line that explicitly says it > doesn't detect the SMP motherboard. Any ideas to start debugging this one? > > thanks in advance > cl. > > > > > -- Willem van der Walt Information Services Directorate Department of Health South Africa tel: 27 12 3120700 Http://www.telecom.com.ar -- redhat-list mailing list unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list