Hey Kyel it is very simple if you have a windows 98 cd or boot disk 
just insert it in. If you are using the boot disk just type in 
fdsik /mbr that will remove it. With cd tell it to boot with cdrom 
support and change directorys to win98 and run fdisk /mbr that deltes 
the master boot recorded it should not delete your partion table or 
anything like that. So dont worry I have had to do that many times.

Luke

----- Original Message -----
From: [EMAIL PROTECTED]
Date: Wednesday, November 6, 2002 3:36 pm
Subject: redhat-list digest, Vol 1 #5765 - 18 msgs

> Send redhat-list mailing list submissions to
>       [EMAIL PROTECTED]
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>       https://listman.redhat.com/mailman/listinfo/redhat-list
> or, via email, send a message with subject or body 'help' to
>       [EMAIL PROTECTED]
> 
> You can reach the person managing the list at
>       [EMAIL PROTECTED]
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of redhat-list digest..."
> 
> 

Today's Topics:

   1. Removing GRUB (Kyle Bartosiak)
   2. setting up IMAP server with redhat 8 (Rune Berge)
   3. Re: check ftp history? (Nick Wilson)
   4. [Solution (more or less)] Re: How can I print a .ps file with page
       numbers? (Wolfgang Pfeiffer)
   5. devfs, input event system, and kernel configuration. (Frank Wang)
   6. Re: How to setup a name server? (Todd A. Jacobs)
   7. Re: [Solution (more or less)] Re: How can I print a .ps file with page
       numbers? (Jack Bowling)
   8. RE: complete system backup (Glenn Goodspeed)
   9. Re: complete system backup (Andrew MacKenzie)
  10. Firewall ports for NFS (Matthew Saltzman)
  11. RE: Firewall ports for NFS ([EMAIL PROTECTED])
  12. Athlon XP + VIA KM266: kernel hangs after ESR (Oliver Rompcik)
  13. Hardware support on Redhat Linux 8.0 (Chris Unitt)
  14. Re: UP2DATE Notifyer Gone (Jonathan Gaudette)
  15. Re: Moving GNOME Panel (Jonathan Gaudette)
  16. Hardware support on Redhat Linux 8.0 (Chris Unitt)
Content-type: multipart/digest; boundary="Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)"


--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 06 Nov 2002 14:12:48 -0800 (PST)
From: Kyle Bartosiak <[EMAIL PROTECTED]>
Subject: Removing GRUB
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: text/plain; charset=ISO-8859-1
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 1
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

Hey everyone,

Alright, I've installed RH8 on my second hard drive, and I made the mistake of 
installing the boot loader and using a boot disk.  I'd like to remove GRUB, and just 
use my boot disk to access Linux.  How do I go about removing the boot loader?




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 23:14:49 +0100 (MET)
From: Rune Berge <[EMAIL PROTECTED]>
Subject: setting up IMAP server with redhat 8
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: TEXT/PLAIN; charset=ISO-8859-1
Content-transfer-encoding: 8BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 2
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>


Hi.

I've installed redhat 8 on my server, and I would like to use it as an
IMAP server too. I've installed the IMAP package, but I don't know how to
proceed to get the server up and running. Does anybody know of a good
guide to setting up IMAP with RH8?

Rune

---------------------------------------------------
Rune Berge                      [EMAIL PROTECTED]
Kl�buveien 148                  7031 Trondheim
Tlf. 73 93 21 47                ICQ: 11551343




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 23:43:54 +0100
From: Nick Wilson <[EMAIL PROTECTED]>
Subject: Re: check ftp history?
In-reply-to: <[EMAIL PROTECTED]>
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Mail-followup-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
Content-disposition: inline
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 3
User-Agent: Mutt/1.4i
References: <[EMAIL PROTECTED]>
 <[EMAIL PROTECTED]>
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>


* and then Ed Wilts declared....
> > Is there a way for me to check the 'history' of ftp commands on a
> > particular user account?
> 
> Are you interested in the client or server portion?  If it's the server,
> check /var/log/xferlog.  If it's the client, then it becomes

Yes, I need to find out if a someone that has access to an account has
been active in that account. IE. downloading/uploading files....

-- 
Nick Wilson     //  www.tioka.com






--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 23:45:52 +0100 (CET)
From: Wolfgang Pfeiffer <[EMAIL PROTECTED]>
Subject: [Solution (more or less)] Re: How can I print a .ps file with page
 numbers?
In-reply-to: <[EMAIL PROTECTED]>
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: TEXT/PLAIN; charset=US-ASCII
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 4
User-Agent: PINE/4.49.999 (Linux)
References: <[EMAIL PROTECTED]>
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

On Nov 5, 2002, 15:10 (+0100) Wolfgang Pfeiffer wrote:

> Redhat 6.2
> ghostscript-5.10-6 (I know it's old, but the latest Redhat version I
> had installed didn't work for my Epson printer ...)
>
> IF I enter a
> $gs mozilla.ps
> I see the the page numbers ("1 of 4", "2 of 4" etc) on the resulting
> view of mozilla.ps.
> But when I load mozilla.ps into ghostview and then print the page from
> there the result is pages without page numbers.

... the whole trouble seems to have been Mozilla related:
to make it a bit clearer: I wanted to print a HTML page that was
changed by Mozilla to a .ps file. I printed this .ps file after
loading it into ghostview.

The software I was torturing:
Mozilla1.2b, 20021101 (probably one of the latest builds)

ghostscript-5.10-6 incl.the patch probably from:
http://www.typhoon.dircon.co.uk/html/ghostscript.html

Printing is done on an Epson Stylus 640

The problem *seems* to be that ghostscript (or whatever software is
responsible for this printing) does not seem to print to the last 0.34
inches or so of a letter sized (8.5 x 11 inches) piece of paper, no
matter what I changed in the Mozilla settings ... which perhaps is the
reason for a bit too less space on top and too much of it at the
bottom of the printouts at times, or simply for varying sizes of
margins at top or bottom without actually changing anything in the
Mozilla settings ..
The printouts themselves are OK, not as nice as I wanted them to be
but I'm definitely fed up with further printing tests ...

The settings how they work:

In the Mozilla Printer properties I have the paper size now set to
"Letter" (8.5 x 11 inch) and the Gap from edge of paper to margin is
like so (inches):
left  right  top    bottom
0.35   0.35  0.04    0.35

The Page Setup in Mozilla for printing headers and footers looks like
this here:
Margins (inches): left right  top   bottom
                   0.5  0.5   0.4    0.6
and I've chosen 1 header and 2 footers.

I'd bet there are better solutions than the ones I found .. I won't
pay you anything if you tell me how it really works ...  :)

Best regards
Wolfgang
-- 
Key on: http://home.t-online.de/home/520050060325-0001/
Key fingerprint = 5FFA E2D1 6DB5 C023 0C5F  3FA7 4E08 5F9F 1560 0BA8

Home Page: www.geocities.com/wolfgangpfeiffer/

                            -- END TRANSMISSION --




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 14:50:21 -0800
From: "Frank Wang" <[EMAIL PROTECTED]>
Subject: devfs, input event system, and kernel configuration.
Sender: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Reply-to: [EMAIL PROTECTED]
Message-id: <002401c285e6$e32acb00$[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT
Importance: Normal
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 5
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

Hi,

I am trying to attach a special serial input device to an X application.
Looking at the kernel document, it seems to me the input core system (the
/dev/input/event#) fits the my needs nicely.  I also realize that the input
system uses the devfs rather than the traditional major/minor number for its
device driver.

So I configured a 2.4.18-5 kernel with the following flags turned on,

        - devfs turned on,
        - the input core module,
        - the input core's keyboard and mouse modules
        - the input core's event modules

The kernel compiles fine.  However, during boot process, everything under
the /var/* and several device mounts were marked as read-only and thus the
kernel fails to boot.  I tried to set the devfs=nomount as its boot
parameter.  It didn't help either.

Thanks in advance!

Frank Wang @ Advanced Technology Video Inc.




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 15:07:48 -0800 (PST)
From: "Todd A. Jacobs" <[EMAIL PROTECTED]>
Subject: Re: How to setup a name server?
In-reply-to: <[EMAIL PROTECTED]>
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: TEXT/PLAIN; charset=US-ASCII
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 6
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

On Wed, 6 Nov 2002, The Redhat Warrior wrote:

> Hi, I was wondering if someone could tell me how to setup a name server
> and have multiple domain names under my web server? Thanks for any info.

Configure BIND with redhat-config-bind-gui, and configure Apache with
redhat-config-httpd.

-- 
"Whenever I feel blue, I start breathing again."

                               - Unknown





--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 06 Nov 2002 15:22:33 -0800
From: Jack Bowling <[EMAIL PROTECTED]>
Subject: Re: [Solution (more or less)] Re: How can I print a .ps file with page
 numbers?
In-reply-to: <[EMAIL PROTECTED]>
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <0H560000PGXOHT@l-daemon>
MIME-version: 1.0
Content-type: TEXT/PLAIN
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 7
References: <[EMAIL PROTECTED]>
 <[EMAIL PROTECTED]>
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

** Reply to message from Wolfgang Pfeiffer <[EMAIL PROTECTED]> on Wed,
06 Nov 2002 23:45:52 +0100 (CET)


> On Nov 5, 2002, 15:10 (+0100) Wolfgang Pfeiffer wrote:
> 
> > Redhat 6.2
> > ghostscript-5.10-6 (I know it's old, but the latest Redhat version I
> > had installed didn't work for my Epson printer ...)
> >
> > IF I enter a
> > $gs mozilla.ps
> > I see the the page numbers ("1 of 4", "2 of 4" etc) on the resulting
> > view of mozilla.ps.
> > But when I load mozilla.ps into ghostview and then print the page from
> > there the result is pages without page numbers.
> 
> ... the whole trouble seems to have been Mozilla related:
> to make it a bit clearer: I wanted to print a HTML page that was
> changed by Mozilla to a .ps file. I printed this .ps file after
> loading it into ghostview.
> 
> The software I was torturing:
> Mozilla1.2b, 20021101 (probably one of the latest builds)
> 
> ghostscript-5.10-6 incl.the patch probably from:
> http://www.typhoon.dircon.co.uk/html/ghostscript.html
> 
> Printing is done on an Epson Stylus 640
>snip>

Have you tired printing using mpage ..."man mpage".

jb

-- 
Jack Bowling
mailto: [EMAIL PROTECTED]




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 17:24:56 -0600
From: Glenn Goodspeed <[EMAIL PROTECTED]>
Subject: RE: complete system backup
Sender: [EMAIL PROTECTED]
To: "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]>
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 8
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

Bjorn - One way to do this is to install an additional, identical hard drive
as a slave in the system.  Assuming you are using IDE drives, then use

dd if=hda of=hdb bs=1024

This will make a complete copy of drive a on drive b.  Just make sure you
know which is which -- use fdisk -l to be sure.   -Glenn.
  
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:Bjorn.Naessens@;roularta.be]
Sent: Wednesday, November 06, 2002 6:47 AM
To: [EMAIL PROTECTED]
Subject: complete system backup


hi there, 

I'm having some difficulties making a complete backup from my redhat system.
At the moment i Backup all critical files by copying them over NFS to my
windows PC where i write them on disc. But i would like to make a "norton
ghost"-like backup. So when something goes wrong ( hacker, disk failure ) ,
I can just format the disk and restore my backup on it to have a working
system again. Is this possible? 

kind regards
Bjorn




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 18:42:02 -0500
From: Andrew MacKenzie <[EMAIL PROTECTED]>
Subject: Re: complete system backup
In-reply-to: <[EMAIL PROTECTED]>
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
Organization: eDespot.com
MIME-version: 1.0
Content-type: multipart/signed; boundary=qFgkTsE6LiHkLPZw;
 protocol="application/pgp-signature"; micalg=pgp-sha1
Content-disposition: inline
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 9
User-Agent: Mutt/1.4i
References: <[EMAIL PROTECTED]>
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>


--qFgkTsE6LiHkLPZw
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

> Bjorn - One way to do this is to install an additional, identical hard dr=
ive
> as a slave in the system.  Assuming you are using IDE drives, then use
>=20
> dd if=3Dhda of=3Dhdb bs=3D1024
>=20
> This will make a complete copy of drive a on drive b.  Just make sure you
> know which is which -- use fdisk -l to be sure.   -Glenn.
Actually, this would make drive "b" an exact copy of drive "a" (subtle
difference).

You could make an image of your hard drive as a file using the same
command:
dd if=3D/dev/hda of=3Dmyhdd.img bs=3D1024

This image could be stored on a remote machine and could be written back to
a drive by:
dd if=3Dmyhdd.img of=3D/dev/hda bs=3D1024

--=20
// Andrew MacKenzie  |  http://www.edespot.com
// With a PC, I always felt limited by the software available.
// On Unix, I am limited only by my knowledge.
//     --Peter J. Schoenster

--qFgkTsE6LiHkLPZw--

--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 18:46:28 -0500 (EST)
From: Matthew Saltzman <[EMAIL PROTECTED]>
Subject: Firewall ports for NFS
Sender: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: TEXT/PLAIN; charset=US-ASCII
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 10
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

What ports on a machine need to be opened in order to export and/or import
NFS mounts?

I know I could take the whole firewall down (the machine is behind another
firewall anyway), but I'd rather not in general (and my intellectual
curiosity is peaked).

Thanks.

-- 
                Matthew Saltzman

Clemson University Math Sciences
[EMAIL PROTECTED]
http://www.math.clemson.edu/~mjs




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 18:54:06 -0500
From: [EMAIL PROTECTED]
Subject: RE: Firewall ports for NFS
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 11
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

My first time using grep!  

grep nfs /etc/services

nfs             2049/tcp        nfsd
nfs             2049/udp        nfsd

/etc/services is where I go to find out which ports are being used by what
services...

Thanks for giving me the opportunity to use grep in a sentence.

carl

-----Original Message-----
From: Matthew Saltzman [mailto:mjs@;ces.clemson.edu]
Sent: Wednesday, November 06, 2002 3:46 PM
To: [EMAIL PROTECTED]
Subject: Firewall ports for NFS


What ports on a machine need to be opened in order to export and/or import
NFS mounts?

I know I could take the whole firewall down (the machine is behind another
firewall anyway), but I'd rather not in general (and my intellectual
curiosity is peaked).

Thanks.

-- 
                Matthew Saltzman

Clemson University Math Sciences
[EMAIL PROTECTED]
http://www.math.clemson.edu/~mjs



-- 
redhat-list mailing list
unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Thu, 7 Nov 2002 00:54:48 +0100
From: Oliver Rompcik <[EMAIL PROTECTED]>
Subject: Athlon XP + VIA KM266: kernel hangs after ESR
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 12
User-Agent: KMail/1.4.2
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

RH 8.0 doesn't want to install:

Processor Athlon XP 1900+ stepping 02
Board: ECS Elitegroup K7VMM, VIA KM266 chipset

While booting from the RH 8.0 - CD 1, the kernel hangs after the following 
message:

CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000002

The kernel just hangs, no panic, no oops.

Same with Debian (bf24 - kernel 2.4.18).

My first thought was power-management, but no change after disabling it.

Found nothing in the kernel mailing list archives to this problem,
any ideas?




--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 23:14:20 -0000
From: "Chris Unitt" <[EMAIL PROTECTED]>
Subject: Hardware support on Redhat Linux 8.0
Sender: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Reply-to: [EMAIL PROTECTED]
Message-id: <000d01c285ea$42a9f030$63c01f3e@BEDROOM>
MIME-version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 13
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

Hi there,

I had some problems with version 7.3 because it wouldn't support:

a) my Surecom EP-320X-S1 Ethernet card
b) my sound blaster audigy player card
and c) my SMC PCI wireless LAN card

I now want to try 8.0 to see if I have better luck.

Everything else on my x86 system seemed to work fine, the sound card and LAN
adapters are kind of important though.

With the surecom card, it had drivers for Linux but they were for an older
kernel and they wouldn't compile under 7.3. As I was following a step by
step guide from a text file and have no clue on how the Linux kernel (or any
unix) handles drivers, I was kind of lost.

There seems to be no support for my audigy card. at all.

I haven't tried looking for support for my wireless card, but thats not as
important as the soundcard and the surecom LAN card.

any help on getting any of these cards to work under 8.0 would be much
appreciated!!

Cheers,

Chris.





--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: 06 Nov 2002 19:21:21 -0500
From: Jonathan Gaudette <[EMAIL PROTECTED]>
Subject: Re: UP2DATE Notifyer Gone
In-reply-to: <1036612816.2517.299.camel@linuxbox>
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: text/plain
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 14
References: <1036612816.2517.299.camel@linuxbox>
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

You aren't alone, it's another wonderful bug.  I can't recover the space
that it's suppose to be in, but I can get it back (temporarily though,
it seems).  run
        $ perl /usr/share/rhn/rhn_applet/applet.py &

It seems that it will stay through a restart, but then some days I get
on my system and it's gone (all I've done is locked it, too, no
restart).  Very weird.  

If anyone knows a perminent fix, or even how to get the "space" back,
that the other left, it'd be much appreciated :)

-- 
-Jon "GenKiller" Gaudette
Digital Drip Webmaster (digital-drip.com)
CNCNZ Co-Webmaster (cncnz.com)

On Wed, 2002-11-06 at 15:00, Joe Giles wrote:
> List, 
> I use KDE on my RH 8.0 machine and I noticed the other day that the
> up2date status that sits in my systray is not there anymore. There is,
> instead, a spot for it that seems to be taken up but nothing is visible.
> Is there a way to get this back? I have tried removing the system tray
> applet and re adding it to no avail. 
> 
> Any help would be great.
> 
> Thanks
> -- 
> Joe Giles
> [EMAIL PROTECTED]
> AOL: mcigiles
> 
> -------
> Registered Linux User #264910 http://counter.li.org
> -------
> 
> 
> 
> -- 
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
> https://listman.redhat.com/mailman/listinfo/redhat-list





--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: 06 Nov 2002 19:27:21 -0500
From: Jonathan Gaudette <[EMAIL PROTECTED]>
Subject: Re: Moving GNOME Panel
In-reply-to: <[EMAIL PROTECTED]>
Sender: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Reply-to: [EMAIL PROTECTED]
Message-id: <[EMAIL PROTECTED]>
MIME-version: 1.0
Content-type: text/plain
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 15
References: <[EMAIL PROTECTED]>
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

Two ways:

1) Click and drag the space above clipper to the bottom of the screen: 
you'll see the outline of the taskbar go down to the bottom.

2) Right click on the System Tray, choose "preferences" and in the
"Location" frame, choose bottom.

-- 
-Jon "GenKiller" Gaudette
Digital Drip Webmaster (digital-drip.com)
CNCNZ Co-Webmaster (cncnz.com)
On Tue, 2002-11-05 at 17:53, [EMAIL PROTECTED] wrote:
> Hi.
> The main GNOME panel has fiendishly moved to align itself with the right
> hand border (East side ) of my desktop. :-(
> I usually have it at the bottom.
> How do I move the panel from the right hand side back to the bottom ???
> TIA
> 
> 
> 
> -- 
> redhat-list mailing list
> unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
> https://listman.redhat.com/mailman/listinfo/redhat-list





--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)

Return-path: <[EMAIL PROTECTED]>
Date: Wed, 6 Nov 2002 22:55:51 -0000
From: "Chris Unitt" <[EMAIL PROTECTED]>
Subject: Hardware support on Redhat Linux 8.0
Sender: [EMAIL PROTECTED]
To: <[EMAIL PROTECTED]>
Reply-to: [EMAIL PROTECTED]
Message-id: <001901c285e7$acfa2750$63c01f3e@BEDROOM>
MIME-version: 1.0
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT
Precedence: bulk
Delivered-to: [EMAIL PROTECTED]
Message: 16
List-Post: <mailto:redhat-list@;redhat.com>
List-Subscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=subscribe>
List-Unsubscribe: <https://listman.redhat.com/mailman/listinfo/redhat-list>,
        <mailto:redhat-list-request@;redhat.com?subject=unsubscribe>
List-Archive: <https://listman.redhat.com/pipermail/redhat-list/>
List-Help: <mailto:redhat-list-request@;redhat.com?subject=help>
List-Id: General Red Hat Linux discussion list <redhat-list.redhat.com>

Hi there,

I had some problems with version 7.3 because it wouldn't support:

a) my Surecom EP-320X-S1 Ethernet card
b) my sound blaster audigy player card
and c) my SMC PCI wireless LAN card

I now want to try 8.0 to see if I have better luck.

Everything else on my x86 system seemed to work fine, the sound card and LAN
adapters are kind of important though.

With the surecom card, it had drivers for Linux but they were for an older
kernel and they wouldn't compile under 7.3. As I was following a step by
step guide from a text file and have no clue on how the Linux kernel (or any
unix) handles drivers, I was kind of lost.

There seems to be no support for my audigy card. at all.

I haven't tried looking for support for my wireless card, but thats not as
important as the soundcard and the surecom LAN card.

any help on getting any of these cards to work under 8.0 would be much
appreciated!!

Cheers,

Chris.






--Boundary_(ID_5BexytGoFWfXGpA/ecCThQ)--

__
redhat-list mailing list
Unsubscribe mailto:redhat-list-request@;redhat.com?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list


Reply via email to