Hi.
I wouldnt use swat. It needs a few steps to set it up correctly and samba works fine whitout it,
The error on 127.0.0.1 is due to the port 139 isnt open in the firewall.
You must open 137 dcp 138 dcp and 139 tcp.On your lan card and not to the outside world.
Remember to create the equals user/passwd pairs on the sambaserver,lindoze and windoze.
So there you go.
Attached my smb.conf file.
Eliza Dushku <[EMAIL PROTECTED]> wrote:
I'm trying to use a simplified version of the online manual that you can
view
at: http://members.rogers.com/freeballer/Downloads/samba-howto.pdf
My Lan Being:
Downstairs (Samba/Linux Machine) 192.168.1.101
Laptop 192.168.1.100
Wacko 192.168.1.102
Everything was going good so far until this point [root@Downstairs
root]# killall -HUP inetd
inetd: no process killed
[root@Downstairs root]# kate /etc/smb.conf
*** REDIRECTED: lan://localhost/
[root@Downstairs root]# /etc/rc.d/init.d/smb stop
Shutting down SMB services: [FAILED]
[root@Downstairs root]# /etc/rc.d/init.d/smb start
Starting SMB services: [ OK ]
[root@Downstairs root]# smbclient -L localhost
added interface ip=192.168.1.101 bcast=192.168.1.255 nmask=255.255.255.0
added interface ip=172.16.187.1 bcast=172.16.187.255 nmask=255.255.255.0
added interface ip=172.16.170.1 b! cast=172.16.170.255 nmask=255.255.255.0
added interface ip=172.16.171.1 bcast=172.16.171.255 nmask=255.255.255.0
error connecting to 127.0.0.1:139 (Connection refused) Error connecting
to 127.0.0.1 (Connection refused) Connection to localhost failed
[root@Downstairs root]#
I created the host, lmhost, services and inetd file entries and all that
EXCEPT FOR tcp wrappers, I did not create entries in the /etc/hosts.deny
and /etc/hosts.allow files.
The manual says that a single entry "ALL" should be in the deny file and
allow file sould have:
"swat : 127.0.0.1 192.168.0.1"
But is that all I need!
I'm not sure weather or not this is my problem but I just couldn't find
any simple explanation on the "tcp wrappers"!!! I opened the
/etc/smb.conf file and found no entries at all in it.... But I went to
one of the windows PCs and found a new workgroup (MyGroup) but I
couldn't access it. Which my LAN is using the "Freeball! er" workgroup!
Please help me out, I know kind of stupid q! uestions but this is my first
time installing/configuration samba and the other online manuals aren't
for newbies (at least the ones I found, in my opinion)... Hey at least
i'm trying huh?! (trying to learn something besides windows)
If you give me a template/example of what the smb config file looks like
and a simple explanation would be great or whatever kind of help you can
give me. Any at all! I'd appreciate it
--------------------
There Are No Stupid Questions "It is better to look foolish for a moment
than to be ignorant for a lifetime." -Chinese proverb
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe
https://listman.redhat.com/mailman/listinfo/redhat-list
http://home.no.net/~knutove/knut_ove_hauge_kuren.htm
Yahoo! Mail har fått nytt utseende
Nytt design, enklere å bruke, alltid tilgang til Adressebok, Kalender og Notisbok
# This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ===================================== [global]
# workgroup = NT-Domain-Name or Workgroup-Name workgroup = nettet # server string is the equivalent of the NT Description field server string = Samba Server # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page hosts allow = 192.168.0. 127.0.0. # if you want to automatically load your printer list rather # than setting them up individually then you'll need this # printcap name = /etc/printcap # load printers = yes # It should not be necessary to spell out the print system type unless # yours is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx # printing = lprng # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used guest account = ftp # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/%m.log # Put a capping on the size of the log files (in Kb). max log size = 0 # Security mode. Most people will want user level security. See # security_level.txt for details. security = user # Use password server option only with security = server # The argument list may include: # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name] # or to auto-locate the domain controller/s # password server = * ; password server = <NT-Server-Name> # Password Level allows matching of _n_ characters of the password for # all combinations of upper and lower case. ; password level = 8 ; username level = 8 # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents encrypt passwords = yes smb passwd file = /etc/samba/smbpasswd # The following is needed to keep smbclient from spouting spurious errors # when Samba is built with support for SSL. ; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt # The following are needed to allow password changing from Windows to # update the Linux sytsem password also. # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. # NOTE2: You do NOT need these to allow workstations to change only # the encrypted SMB passwords. They allow the Unix password # to be kept in sync with the SMB password. ; unix password sync = Yes ; passwd program = /usr/bin/passwd %u ; passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* # Unix users can map to different SMB User names ; username map = /etc/samba/smbusers # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /etc/samba/smb.conf.%m # This parameter will control whether or not Samba should obey PAM's # account and session management directives. The default behavior is # to use PAM for clear text authentication only and to ignore any # account or session management. Note that Samba always ignores PAM # for authentication in the case of encrypt passwords = yes ; obey pam restrictions = yes # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. interfaces = 192.168.0.1/24 127.0.0.1/24 # Configure remote browse list synchronisation here # request announcement to, or browse list sync from: # a specific host or from / to a whole subnet (see below) ; remote browse sync = 192.168.3.25 192.168.5.255 # Cause this host to announce itself to local subnets here remote announce = 192.168.0.255 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply local master = no # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable ; os level = 33 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election ; preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. domain logons = no # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) ; logon script = %m.bat # run a specific logon batch file per username # logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below ; logon path = \\%L\Profiles\%U # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS #Server wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. dns proxy = no # Case Preservation can be handy - system default is _no_ # NOTE: These can be set on a per share basis ; preserve case = no ; short preserve case = no # Default case is normally upper case for all DOS files ; default case = lower # Be very careful with case sensitivity - it can break things! ; case sensitive = no printcap name = lpstat load printers = yes #============================ Share Definitions ============================== [homes] comment = Home Directories browseable = no guest ok = yes writable = yes valid users = %S create mode = 0775 directory mode = 0775 # If you want users samba doesn't recognize to be mapped to a guest user ; map to guest = bad user # Un-comment the following and create the netlogon directory for Domain Logons # [netlogon] # comment = Network Logon Service # path = /usr/local/samba/lib/netlogon # guest ok = yes # writable = no # share modes = no # Un-comment the following to provide a specific roving profile share # the default is to use the user's home directory ;[Profiles] ; path = /usr/local/samba/profiles ; browseable = no ; guest ok = yes [epson] comment = All Printers path = /var/spool/samba print command = lpr /dev/usb/lp0 -o raw %s ; rm %s -r lpq command = /usr/bin/lpq -P%p lprm command = /usr/bin/cancel %p-%j printable = yes public = yes printer name = tp0 printing = cups create mask = 0777 create mode = 0777 directory mask = 0777 directory mode = 0777 [upload] comment = Temporary file space path = /home/knut/upload guest ok = yes read only = no public = yes writeable = yes create mask = 0775 create mode = 0775 # A publicly accessible directory, but read only, except for people in # the "staff" group #[ftp] # comment = Public Stuff # path = /home/knut/ftp # public = yes # writable = yes # printable = yes # browseable = no # guest only = yes # Other examples. # # A private printer, usable only by fred. Spool data will be placed in fred's # home directory. Note that fred must have write access to the spool directory, # wherever it is. ;[fredsprn] ; comment = Fred's Printer ; valid users = fred ; path = /home/fred ; printer = freds_printer ; public = no ; writable = no ; printable = yes # A private directory, usable only by fred. Note that fred requires write # access to the directory. [admin$] comment = root linux path = / # valid users = admin$ public = no writable = yes printable = no # a service which has a different directory for each machine that connects # this allows you to tailor configurations to incoming machines. You could # also use the %U option to tailor it by user name. # The %m gets replaced with the machine name that is connecting. ;[pchome] ; comment = PC Directories ; path = /usr/local/pc/%m ; public = no ; writable = yes # A publicly accessible directory, read/write to all users. Note that all files # created in the directory by users will be owned by the default user, so # any user with access can delete any other user's files. Obviously this # directory must be writable by the default user. Another user could of course # be specified, in which case all files would be owned by that user instead. ;[public] ; path = /usr/somewhere/else/public ; public = yes ; only guest = yes ; writable = yes ; printable = no # The following two entries demonstrate how to share a directory so that two # users can place files there that will be owned by the specific users. In this # setup, the directory should be writable by both users and should have the # sticky bit set on it to prevent abuse. Obviously this could be extended to # as many users as required. [myshare] comment = knut's stuff path = /usr/somewhere/shared valid users = root kjersti tarkin knut localhost public = no writable = yes printable = no create mask = 0765 create mode = 0775