Hi all I've spent some time looking at many DSL HOWTOs to try and find one that closely relates to my situation couldn't find one that specifically answers my questions and I wondered if anyone out there could help me out. I've acquired an Alcatel SpeedTouch 530 with both ethernet and USB ports but I plan to use the ethernet port with my Linux (RH8.0) gateway. The gateway box has two NICs, eth0 for external and eth1 for my internal network. As far as I can tell I've got all the necessary modules and daemons, IPTABLES, NAT, FORWARDING etc enabled. My internal network seems fine. All the machines can ping each other as well a ping the external NIC which is assigned the fixed IP address provided by my ISP. But because I did not purchase the modem/router from them they wouldn't give me any tech support by way of setup. I've created and put in place all the firewall policy and rules using bits and pieces of information I've dug up touring the net and from this list.
My main problem is configuring the router/modem. Looking at the default configuration and reading the manual there doesn't seem to be much to do. And that's the bit that worries me. As the saying goes, " looks too good to be true." All I've done is disabled the built-in DHCP but left everything else as is. My questions are as follows: 1. What sort of entries, if any, would I have to add to the speedtouch configuration, apart from my login name and password as supplied by my ISP? 2. Would it require the DNS server and gateway entries supplied by the ISP even though these have already been made on the Linux gateway? 3. Would I need to make changes to the CHAP/PAP Scripts on the Linux box in order to be connected or would the connection be automatic once all the boxes are switched on? 4. And since my ISP did not provide any dial-up numbers am I right to presume the router/modem won't have to dial up the way ordinary modems would do? I would be very grateful if anyone with such a system or something similar could give me some tips or tricks in setting up modem/router and subsequently my network. Or if you could suggest some sites or documents which might have the sort of information I'm looking for. regards Awuku -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
