Hi Raymond, > I'm trying to get 2 IP adresses on 2 different NIC's with IP aliassing. > These NIC's have as default gateway the IP adress '62.150.201.1'. > The problem is that my routing table contains 3 default gateways & I cannot > ping ifcfg-eth1. I cannot find a document on the internet in which is > explained where you must config your default gatway and where not in the > ifcfg-eth files.
I think you can not do it that way. You can not use the same network on two nick. Are you trying to make a bridging router? > > > My config files are as follows: > > [root@foxserver network-scripts]# cat ifcfg-eth0 > DEVICE='eth0' > BOOTPROTO='none' > ONBOOT='yes' > IPADDR='62.150.201.110' > GATEWAY='62.150.201.1' > TYPE='Ethernet' > USERCTL='no' > NETMASK='255.255.255.0' > NETWORK='62.150.201.0' > BROADCAST='62.150.201.255' > > [root@foxserver network-scripts]# cat ifcfg-eth0:0 > DEVICE='eth0:0' > BOOTPROTO='none' > ONBOOT='yes' > IPADDR='62.150.201.140' > GATEWAY='62.150.201.1' > TYPE='Ethernet' > USERCTL='no' > NETMASK='255.255.255.0' > NETWORK='62.150.201.0' > BROADCAST='62.150.201.255' > > [root@foxserver network-scripts]# cat ifcfg-eth1 > DEVICE=eth1 > ONBOOT=yes > BOOTPROTO=none > IPADDR=62.150.201.111 > NETMASK=255.255.255.0 > GATEWAY=62.150.201.1 > > [root@foxserver network-scripts]# cat ifcfg-eth1:0 > DEVICE='eth1:0' > ONBOOT=yes > BOOTPROTO=none > IPADDR=62.150.201.112 > NETMASK=255.255.255.0 > BROADCAST= 62.150.201.255 > GATEWAY=62.150.201.1 > TYPE='Ethernet' > > De routing tabel: > > [root@foxserver network-scripts]# route > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > 62.150.201.0 * 255.255.255.0 U 0 0 0 eth1 > 62.150.201.0 * 255.255.255.0 U 0 0 0 eth1 > 127.0.0.0 * 255.0.0.0 U 0 0 0 lo > default 62.150.201.1 0.0.0.0 UG 0 0 0 eth0 > default 62.150.201.1 0.0.0.0 UG 1 0 0 eth1 > default 62.150.201.1 0.0.0.0 UG 1 0 0 eth0 > > What is going wrong here ? 3 default gateways isn't OK I think. And why > can't I ping ifcfg-eth1 62.150.201.111 ? > > Thanks, > > Raymond > > _________________________________________________________________ > The new MSN 8: advanced junk mail protection and 2 months FREE* > http://join.msn.com/?page=features/junkmail > > -- > redhat-list mailing list > unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe > https://listman.redhat.com/mailman/listinfo/redhat-list -- redhat-list mailing list unsubscribe mailto:[EMAIL PROTECTED]?subject=unsubscribe https://listman.redhat.com/mailman/listinfo/redhat-list
