I had the same problem. Turns out that I was not setting the S60 register
to 64. The other value is 56. This stands for switched 56K or 64K B
channels. Anyway, below is the init string that was given to me by my ISP
for the Impact IQ:
'OK' 'AT E0 S60=64 S61=2 S70=1 S71=1 S80=1 S84=1 S82=2 S84=1'
'OK' 'ATD1xxxxxxxxxx'
Note, I also had to change the dialed number string to 1+10# form. I was
using 7# form. As soon as I sent this init sequence, both barrels started
blazing right after connection up ;-).
Hope this helps..
Mukesh
Ken Walenta wrote:
>
> I finally got my 3COM Impact IQ modem to dial and connect to my ISP but the
> funny thing is that only once is active. Under NT and 95 both channels
> become active right after the connection is made but I don't have the same
> luck with Red Hat 5.1 any ideas?
>
> Ken
>
> --
> PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
> http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
> To unsubscribe: mail [EMAIL PROTECTED] with
> "unsubscribe" as the Subject.
--
Mukesh Sundaram [EMAIL PROTECTED]
1307 S. Mary Ave. #212 (408) 730-8647
Sunnyvale, CA 94087 (408) 737-3658 (fax)
--
PLEASE read the Red Hat FAQ, Tips, Errata and the MAILING LIST ARCHIVES!
http://www.redhat.com/RedHat-FAQ /RedHat-Errata /RedHat-Tips /mailing-lists
To unsubscribe: mail [EMAIL PROTECTED] with
"unsubscribe" as the Subject.
