I fixed it.I copied raptor2.pc to /usr/lib/pkgconfig and it worked. -------------------------------------------------- From: "Derlis" <[email protected]> Sent: Tuesday, January 18, 2011 12:56 PM To: "Iraklis Leontiadis" <[email protected]> Subject: Re: [redland-dev] cygwin build - raptor2-2.0.0.tar.gz
> HI hi.. > Try the rasqal-0.9.20 version and be sure to clean the incomplete > installations > > make clean > make distclean > > this is part of the script that I use > > export HOME=/ontoproyect/usr > export PATH=$HOME/bin:$PATH > > ./configure --enable-static CPPFLAGS="-I$HOME/include" > LDFLAGS="-L$HOME/lib" > PKG_CONFIG_PATH="$HOME/lib/pkgconfig" --bindir=$HOME/bin --sbindir=$HOME/sbin > --libexecdir=$HOME/libexec --sysconfdir=$HOME/etc --sharedstatedir=$HOME/com > --localstatedir=$HOME/var --libdir=$HOME/lib --includedir=$HOME/include > --datarootdir=$HOME/share > --oldincludedir=$HOME/old --enable-raptor2 > make > make install > > I even compiled for ARM, which is why I have it well organized in each > folder. > I hope it helps you .. > > Cheers > > > > -------------------------------------------------- > From: "Iraklis Leontiadis" <[email protected]> > Sent: Tuesday, January 18, 2011 11:56 AM > To: "Derlis" <[email protected]> > Subject: Re: [redland-dev] cygwin build - raptor2-2.0.0.tar.gz > >> Hi Derlis and thank for your reply. >> What I did is that I add this code inside the configuration of the rasqal >> : >> 11984 # raptor V2 is REQUIRED; --enable-raptor2 option was removed >> 11985 RAPTOR_MIN_VERSION=2.0.0 >> 11986 >> 11987 # Check whether --enable-raptor2 was given. >> 11988 if test "${enable-raptor2 set}" = set; then : >> 11989 enableval=$enable-raptor2 >> 11990 else >> 11991 enable-raptor2 ="no" >> 11992 fi >> >> as there is no code for the --enable-raptor2 flag. >> But I am getting an error when I run ./configure for rasqal. that >> says --enable-raptor2 is unrecognized and then the same error for not >> having installed Raptor v2. >> Since I've installed raptor 2-2.0.0 why the configure prompts with this >> error? >> >> Thanks >> Iraklis >> >> >> -------------------------------------------------- >> From: "Derlis" <[email protected]> >> Sent: Tuesday, January 18, 2011 11:27 AM >> To: "Iraklis Leontiadis" <[email protected]> >> Subject: Re: [redland-dev] cygwin build - raptor2-2.0.0.tar.gz >> >>> Hello Iraklis, you have to --enable-raptor2 in your ./configure >>> See more details in ./configure -h >>> >>> Cheers >>> >>> Derlis Gregor >>> >>> >>> >>> -------------------------------------------------- >>> From: "Iraklis Leontiadis" <[email protected]> >>> Sent: Tuesday, January 18, 2011 11:20 AM >>> To: "Lauri Aalto" <[email protected]> >>> Cc: <[email protected]> >>> Subject: Re: [redland-dev] cygwin build - raptor2-2.0.0.tar.gz >>> >>>> Thanks . I've successfully installed it and I make a fast test with the >>>> rapper tool provided by raptor under the utils dir. >>>> Now I'd like to install rasqal 0.9.22 but at the configuring phase it >>>> prompts me with an error that raptor V2 is not installed.And it is true >>>> because there is no raptor.exe somewhere but after build the rapper >>>> tool had >>>> been created >>>> Also when I run "whereis raptor" cygwin shell replies with an empty >>>> answer. >>>> >>>> Iraklis >>>> >>>> >>>> -------------------------------------------------- >>>> From: "Lauri Aalto" <[email protected]> >>>> Sent: Tuesday, January 18, 2011 10:37 AM >>>> To: "Iraklis Leontiadis" <[email protected]> >>>> Cc: <[email protected]> >>>> Subject: Re: [redland-dev] cygwin build - raptor2-2.0.0.tar.gz >>>> >>>>> Hi, >>>>> >>>>> you only need to autogen.sh if you are building from github sources. >>>>> For a release tarball the build process is just >>>>> >>>>> ./configure [...] && make && make install >>>>> >>>>> To get it fixed, rerun configure without --enable-maintainer-mode. >>>>> Maintainer mode gets enabled automagically by autogen.sh and it >>>>> activates e.g. docs generation which needs files not present in >>>>> release tarballs. >>>>> >>>>> Lauri >>>>> >>>>> On Tue, Jan 18, 2011 at 11:23 AM, Iraklis Leontiadis >>>>> <[email protected]> >>>>> wrote: >>>>>> I downloaded raptor2-2.0.0.tar.gz on my windows 7 machine and I tried >>>>>> to >>>>>> install the lib . >>>>>> 1) I run the autogen script successfully. >>>>>> 2)I run the configure script successfully. >>>>>> 3) when I tried to build the raptor software with the tha make >>>>>> command >>>>>> under cygwin I got the following error : >>>>>> home@home-PC ~/raptor2-2.0.0 >>>>>> $ make >>>>>> Making all in src >>>>>> make[1]: Entering directory `/home/home/raptor2-2.0.0/src' >>>>>> make all-am >>>>>> make[2]: Entering directory `/home/home/raptor2-2.0.0/src' >>>>>> make[2]: Leaving directory `/home/home/raptor2-2.0.0/src' >>>>>> make[1]: Leaving directory `/home/home/raptor2-2.0.0/src' >>>>>> Making all in utils >>>>>> make[1]: Entering directory `/home/home/raptor2-2.0.0/utils' >>>>>> make[1]: Nothing to be done for `all'. >>>>>> make[1]: Leaving directory `/home/home/raptor2-2.0.0/utils' >>>>>> Making all in docs >>>>>> make[1]: Entering directory `/home/home/raptor2-2.0.0/docs' >>>>>> make[1]: *** No rule to make target `raptor-1-to-2-map.tsv', needed >>>>>> by >>>>>> `raptor-changes.xml'. Stop. >>>>>> make[1]: Leaving directory `/home/home/raptor2-2.0.0/docs' >>>>>> make: *** [all-recursive] Error 1 >>>>>> >>>>>> >>>>>> Could anyone help me with the build?Am I completely wrong as I am >>>>>> trying >>>>>> to >>>>>> install it with cygwin under a windows machine? >>>>>> >>>>>> Thank you in advance >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> redland-dev mailing list >>>>>> [email protected] >>>>>> http://lists.librdf.org/mailman/listinfo/redland-dev >>>>>> >>>>> >>>> _______________________________________________ >>>> redland-dev mailing list >>>> [email protected] >>>> http://lists.librdf.org/mailman/listinfo/redland-dev >>> >>> > _______________________________________________ redland-dev mailing list [email protected] http://lists.librdf.org/mailman/listinfo/redland-dev
