I have done this just two months ago.
First and foremost take a couple of days and go over ideas in your head on how and
where you will place everything, because things don't always go together as it seems.
I put all my corals into Rubbermaid containers with the water from the tank to cover
it and when I was done I just siphoned almost all the water from the buckets back, I
left some out because of
all the skunge that was on the bottom. So I also got a water change in there too boot.
Good luck and I can say that I was happy that I did it.
Jeff from Scranton Pa.
Jerry Porter wrote:
> When I had to remove the lunar wrasse from the 110 had to pull all the rock
> out and took two shoots before kris thought it looked okay. that is just
> me, but it never finishes the way you invision it to be IMO.
> jp
> http://www.krispcritters.com
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of SteveM
> Sent: Saturday, January 06, 2001 1:29 PM
> To: Reefkeeping@Athiel. Com
> Subject: Changing Aquascape ?
>
> All,
>
> What's the best way to go about re-arranging rockwork in a reef???
> I want to remove some of the live rock in my reef, then re-arrange the rest
> of it.
>
> I realize all corals and other inverts should be removed first but would you
> then remove all the rock from the reef, or pull a few peieces out, enough so
> you have room to re-scape the rockwork??
>
> I know the best way would be to pull it all out so you can picture how you
> want to arrange it, however, I'm hesitent to remove all the rock because of
> all the critters..
> Any ideas???
>
> Thanks,
> SteveM.
>
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
> [EMAIL PROTECTED] with a command to remove you from the list.
> The list manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
>
> ________________________________________
>
> LEAVING THE LIST
> ================
> To stop receiving messages you will need to send a message to
>[EMAIL PROTECTED] with a command to remove you from the list. The list
>manager controls who belongs to the list.
>
> For example:
> --------------------------------------------------------------
> From: John Doe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: <not needed>
>
> UNSUBSCRIBE
> --------------------------------------------------------------
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
