No the skimmer is in a seperate compartment in the sump

-----Original Message-----
From: Culross, Andrew [mailto:[EMAIL PROTECTED]]
Sent: 11 September 2001 13:46
To: [EMAIL PROTECTED]
Subject: RE: Hello, and can you help


Check for air leaks near the pump inlet.

Is the skimmer output near the pump inlet ?

-----Original Message-----
From: Owens, Rob [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 11, 2001 2:55 AM
To: '[EMAIL PROTECTED]'
Subject: Hello, and can you help


Hello people,
This is my first post, and I'd appreciate some advice.
I've just set up my first tank three days ago, it is a 40 gal with coral
sand, 10lbs live rock and 50lbs Indian Ocean Rock.
The problems are the water is still very cloudy and I'm not sure if this is
normal or should I use a product to floculate the particles and the second
question is the return line from the sump is pumping lots of micro bubbles
into the tank- I can stop this by attaching a piece of filter floss to the
outlet but is there another way.

Thanks

        *       Robbie Owens
        *       E-Mail: [EMAIL PROTECTED]


________________________________________

LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED]  with a command to remove you from the list.
The list manager  controls who belongs to the list.  

For example:
 --------------------------------------------------------------
       From: John Doe <[EMAIL PROTECTED]>
         To: [EMAIL PROTECTED]
    Subject: <not needed>

    UNSUBSCRIBE
 --------------------------------------------------------------
________________________________________

LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED]  with a command to remove you from the list.
The list manager  controls who belongs to the list.  

For example:
 --------------------------------------------------------------
       From: John Doe <[EMAIL PROTECTED]>
         To: [EMAIL PROTECTED]
    Subject: <not needed>

    UNSUBSCRIBE
 --------------------------------------------------------------
________________________________________

LEAVING THE LIST
================
To stop receiving messages you will need to send a message to  
[EMAIL PROTECTED]  with a command to remove you from the list.  The list 
manager  controls who belongs to the list.  

For example:
 --------------------------------------------------------------
       From: John Doe <[EMAIL PROTECTED]>
         To: [EMAIL PROTECTED]
    Subject: <not needed>

    UNSUBSCRIBE
 --------------------------------------------------------------

Reply via email to