Thanks. Do you recommend I incorporate a high pressure check valve into the
line (they are expensive) or should a normal check valve do the trick? I
could add a second in line and run 2 check valves. One is already built into
the bubble counter I bought (tried to make my own, but it didnt work out to
well!) but I could run a second in line.
Thanks for your help, it has made me feel better about the design, I hope it
works!
Shane
> -----Original Message-----
> From: DBW [SMTP:[EMAIL PROTECTED]]
> Sent: Monday, September 17, 2001 7:26 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Calcium Reactor
>
> Shane,
>
> >My question is this, is that normal or do I have a design flaw? If you
> guys
>
> Normal.
>
> >who have reactors were to run them w/o a check valve in the CO2 line,
> would
> >the water backflow? Do I just need to add a check valve or do I need to
> move
>
>
________________________________________
LEAVING THE LIST
================
To stop receiving messages you will need to send a message to
[EMAIL PROTECTED] with a command to remove you from the list. The list
manager controls who belongs to the list.
For example:
--------------------------------------------------------------
From: John Doe <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: <not needed>
UNSUBSCRIBE
--------------------------------------------------------------
