The system is running Linux kernel 2.6.5-rc2. It's tainted by Nvidia drivers.
The system was compiling the kernel, and Reiser4 panicked. The Reiser4 panic starts at line 443 of the attached dmesg log. The Reiser4 filesystem is on a MD RAID 0 device made of two SCSI disks. I had some Reiser4 debugging options turned on. I was trying to catch it creating blocks of zeros, which is something I noticed it doing to frequently appended files like .xsession-errors and my Evolution mbox file. After I rebooted the system, I copied the kernel source to another filesystem and finished the compile, which does not include debugging options (It was way too slow!), so I am not running with debugging now. But if you want more information, let me know and I will try to provide it. -- Jonathan Briggs [EMAIL PROTECTED]
Linux version 2.6.5-rc2 ([EMAIL PROTECTED]) (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #5 Mon Mar 22 10:50:14 MST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ec000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa2c0 ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000 ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0030 ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000 Built 1 zonelists Kernel command line: ro root=/dev/md1 rootfstype=reiserfs single Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1659.672 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 512988k/524224k available (3016k kernel code, 10472k reserved, 1336k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3284.99 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2000+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1659.0295 MHz. ..... host bus clock speed is 265.0487 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040311 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:................................................................................................................................................ Table [DSDT](id F004) - 413 Objects with 41 Devices 144 Methods 18 Regions ACPI Namespace successfully loaded at root c0589ffc ACPI: IRQ9 SCI: Edge set to Level Trigger. evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0747 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 0000000000000820 on int 9 evgpeblk-0747 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 0000000000000830 on int 9 Completing Region/Field/Buffer/Package initialization:........................................................................................ Initialized 18/18 Regions 5/5 Fields 35/35 Buffers 30/30 Packages (422 nodes) Executing all Device _STA and_INI methods:........................................... 43 Devices found containing: 43 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS18 that hid as a SIS503 (compatible=1) Enabling SiS 96x SMBus. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15) spurious 8259A interrupt: IRQ7. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 12 14 15) SCSI subsystem initialized ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 3 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Machine check exception polling timer started. Total HugeTLB memory allocated, 0 ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 Loading Reiser4. See www.namesys.com for a description of Reiser4. phash_hash_table: 128 buckets ps_hash_table: 32 buckets ln_hash_table: 1024 buckets Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU1] (supports C1) Real Time Clock Driver v1.12 Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS735 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA hdc: Pioneer DVD-ROM ATAPIModel DVD-116 0122, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 sym0: <1010-33> rev 0x1 at pci 0000:00:11.0 irq 11 sym0: using 64 bit DMA addressing sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym0: SCAN AT BOOT disabled for targets 2 3 4 5 6 8 9 10 11 12 13 14 15. sym0: SCSI BUS has been reset. scsi0 : sym-2.1.18i Vendor: SEAGATE Model: ST318453LW Rev: 0005 Type: Direct-Access ANSI SCSI revision: 03 sym0:0:0: tagged command queuing enabled, command queue depth 16. Vendor: SEAGATE Model: ST318453LW Rev: 0006 Type: Direct-Access ANSI SCSI revision: 03 sym0:1:0: tagged command queuing enabled, command queue depth 16. sym1: <1010-33> rev 0x1 at pci 0000:00:11.1 irq 10 sym1: using 64 bit DMA addressing sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. sym1: SCAN AT BOOT disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13 14 15. sym1: SCSI BUS has been reset. scsi1 : sym-2.1.18i sym0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62) SCSI device sda: 35843686 512-byte hdwr sectors (18352 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sda4 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 sym0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 62) SCSI device sdb: 35843686 512-byte hdwr sectors (18352 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sdb4 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) BIOS EDD facility v0.13 2004-Mar-09, 4 devices found Please report your BIOS at http://linux.dell.com/edd/results.html md: Autodetecting RAID arrays. md: autorun ... md: considering sdb4 ... md: adding sdb4 ... md: sdb3 has different UUID to sdb4 md: sdb1 has different UUID to sdb4 md: adding sda4 ... md: sda3 has different UUID to sdb4 md: sda1 has different UUID to sdb4 md: created md2 md: bind<sda4> md: bind<sdb4> md: running: <sdb4><sda4> md2: setting max_sectors to 2048, segment boundary to 524287 raid0: looking at sdb4 raid0: comparing sdb4(13478912) with sdb4(13478912) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda4 raid0: comparing sda4(13478912) with sdb4(13478912) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 26957824 blocks. raid0 : conf->hash_spacing is 26957824 blocks. raid0 : nb_zone is 1. raid0 : Allocating 4 bytes for hash. md: considering sdb3 ... md: adding sdb3 ... md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda1 has different UUID to sdb3 md: created md1 md: bind<sda3> md: bind<sdb3> md: running: <sdb3><sda3> md1: setting max_sectors to 2048, segment boundary to 524287 raid0: looking at sdb3 raid0: comparing sdb3(3906560) with sdb3(3906560) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda3 raid0: comparing sda3(3906560) with sdb3(3906560) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 7813120 blocks. raid0 : conf->hash_spacing is 7813120 blocks. raid0 : nb_zone is 1. raid0 : Allocating 4 bytes for hash. md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind<sda1> md: bind<sdb1> md: running: <sdb1><sda1> raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. found reiserfs format "3.6" with standard journal Reiserfs journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (md1) for (md1) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 156k freed drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:13.0: VIA Technologies, Inc. USB uhci_hcd 0000:00:13.0: irq 11, io base 0000bc00 uhci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:13.0: detected 2 ports uhci_hcd 0000:00:13.0: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb1: Product: VIA Technologies, Inc. USB usb usb1: Manufacturer: Linux 2.6.5-rc2 uhci_hcd usb usb1: SerialNumber: 0000:00:13.0 drivers/usb/core/usb.c: usb_hotplug usb usb1: registering 1-0:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: unknown reserved power switching mode hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Port indicators are not supported hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: hub controller current requirement: 0mA hub 1-0:1.0: local power source is good hub 1-0:1.0: no over-current condition exists hub 1-0:1.0: enabling power on all ports uhci_hcd 0000:00:13.1: VIA Technologies, Inc. USB (#2) uhci_hcd 0000:00:13.1: irq 11, io base 0000c000 uhci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:13.1: detected 2 ports uhci_hcd 0000:00:13.1: root hub device address 1 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb2: Product: VIA Technologies, Inc. USB (#2) usb usb2: Manufacturer: Linux 2.6.5-rc2 uhci_hcd usb usb2: SerialNumber: 0000:00:13.1 drivers/usb/core/usb.c: usb_hotplug uhci_hcd 0000:00:13.0: port 1 portsc 008a hub 1-0:1.0: port 1, status 100, change 3, 12 Mb/s uhci_hcd 0000:00:13.0: port 2 portsc 01ab hub 1-0:1.0: port 2, status 301, change 3, 1.5 Mb/s usb usb2: registering 2-0:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: unknown reserved power switching mode hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: Port indicators are not supported hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: hub controller current requirement: 0mA hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: enabling power on all ports uhci_hcd 0000:00:13.0: port 2 portsc 01a9 uhci_hcd 0000:00:13.0: port 2 portsc 01a9 uhci_hcd 0000:00:13.0: port 2 portsc 01a9 ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:13.2: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:13.2: reset hcs_params 0x2204 dbg=0 cc=2 pcc=2 ordered !ppc ports=4 ehci_hcd 0000:00:13.2: reset hcc_params 0002 thresh 0 uframes 256/512/1024 ehci_hcd 0000:00:13.2: irq 10, pci mem e08d0a00 uhci_hcd 0000:00:13.0: port 2 portsc 01a9 ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Dec-29 ehci_hcd 0000:00:13.2: root hub device address 1 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 drivers/usb/core/message.c: USB device number 1 default language ID 0x409 usb usb3: Product: VIA Technologies, Inc. USB 2.0 usb usb3: Manufacturer: Linux 2.6.5-rc2 ehci_hcd usb usb3: SerialNumber: 0000:00:13.2 drivers/usb/core/usb.c: usb_hotplug uhci_hcd 0000:00:13.0: port 2 portsc 01aa usb usb3: registering 3-0:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug uhci_hcd 0000:00:13.0: port 2 portsc 01a8 hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: ganged power switching hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: Single TT hub 3-0:1.0: TT requires at most 8 FS bit times hub 3-0:1.0: Port indicators are not supported hub 3-0:1.0: power on to power good time: 20ms hub 3-0:1.0: hub controller current requirement: 0mA hub 3-0:1.0: local power source is good hub 3-0:1.0: no over-current condition exists hub 3-0:1.0: enabling power on all ports uhci_hcd 0000:00:13.0: port 2 portsc 01a8 uhci_hcd 0000:00:13.0: port 2 portsc 01a8 uhci_hcd 0000:00:13.0: port 2 portsc 01a8 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver uhci_hcd 0000:00:13.0: port 2 portsc 01a8 uhci_hcd 0000:00:13.0: port 2 portsc 01a8 uhci_hcd 0000:00:13.0: port 2 portsc 01a8 uhci_hcd 0000:00:13.0: port 2 portsc 01a8 uhci_hcd 0000:00:13.0: port 2 portsc 01a8 uhci_hcd 0000:00:13.0: port 2 portsc 01a8 uhci_hcd 0000:00:13.0: port 2 portsc 01a8 hub 1-0:1.0: debounce: port 2: delay 400ms stable 0 status 0x300 hub 1-0:1.0: connect-debounce failed, port 2 disabled ehci_hcd 0000:00:13.2: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT hub 3-0:1.0: port 2, status 501, change 1, 480 Mb/s hub 3-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501 ehci_hcd 0000:00:13.2: port 2 low speed --> companion ehci_hcd 0000:00:13.2: GetStatus port 2 status 003402 POWER OWNER sig=k CSC uhci_hcd 0000:00:13.1: port 1 portsc 008a hub 2-0:1.0: port 1, status 100, change 3, 12 Mb/s uhci_hcd 0000:00:13.1: port 2 portsc 008a hub 2-0:1.0: port 2, status 100, change 3, 12 Mb/s uhci_hcd 0000:00:13.0: port 1 portsc 0088 hub 1-0:1.0: port 1 enable change, status 100 uhci_hcd 0000:00:13.0: port 2 portsc 01ab hub 1-0:1.0: port 2, status 301, change 3, 1.5 Mb/s uhci_hcd 0000:00:13.0: port 2 portsc 01a9 uhci_hcd 0000:00:13.0: port 2 portsc 01a9 uhci_hcd 0000:00:13.0: port 2 portsc 01a9 uhci_hcd 0000:00:13.0: port 2 portsc 01a9 uhci_hcd 0000:00:13.0: port 2 portsc 01a9 hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x301 Adding 500728k swap on /dev/sda2. Priority:1 extents:1 Adding 500728k swap on /dev/sdb2. Priority:1 extents:1 uhci_hcd 0000:00:13.1: suspend_hc usb 1-2: new low speed USB device using address 2 usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 drivers/usb/core/message.c: USB device number 2 default language ID 0x409 usb 1-2: Product: Microsoft Wireless Intellimouse Explorer® 1.0A usb 1-2: Manufacturer: Microsoft drivers/usb/core/usb.c: usb_hotplug usb 1-2: registering 1-2:1.0 (config #1, interface 0) drivers/usb/core/usb.c: usb_hotplug hid 1-2:1.0: usb_probe_interface hid 1-2:1.0: usb_probe_interface - got id input: USB HID v1.10 Mouse [Microsoft Microsoft Wireless Intellimouse Explorer® 1.0A] on usb-0000:00:13.0-2 uhci_hcd 0000:00:13.1: port 1 portsc 0088 hub 2-0:1.0: port 1 enable change, status 100 uhci_hcd 0000:00:13.1: port 2 portsc 0088 hub 2-0:1.0: port 2 enable change, status 100 EXT2-fs warning (device md0): ext2_fill_super: mounting ext3 filesystem as ext2 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended ef_hash_table: 32768 buckets z_hash_table: 8192 buckets z_hash_table: 8192 buckets j_hash_table: 131072 buckets loading reiser4 bitmap......done (703 jiffies) ip_tables: (C) 2000-2002 Netfilter core team sis900.c: v1.08.07 11/02/2003 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 3, 00:0a:e6:a7:29:60. eth0: Media Link On 100mbps full-duplex NET: Registered protocol family 10 Disabled Privacy Extensions on device c04ff720(lo) IPv6 over IPv4 tunneling driver intel8x0_measure_ac97_clock: measured 49490 usecs intel8x0: clocking to 48000 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) lp0: using parport0 (polling). lp0: console ready eth0: no IPv6 routers present nvidia: module license 'NVIDIA' taints kernel. Linux agpgart interface v0.100 (c) Dave Jones atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. hdc: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 cdrom: This disc doesn't have any tracks I recognize! nfs warning: mount version older than kernel nfs warning: mount version older than kernel nfs warning: mount version older than kernel cdrom: This disc doesn't have any tracks I recognize! ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack reiser4[cc1(27626)]: check_dkeys (fs/reiser4/search.c:969)[vs-1199]: code: -503 at fs/reiser4/lock.c:434 reiser4 panicked cowardly: assertion failed: keyeq(&node->rd_key, &right->ld_key) ------------[ cut here ]------------ kernel BUG at fs/reiser4/debug.c:75! invalid operand: 0000 [#1] PREEMPT CPU: 0 EIP: 0060:[<c01b7b23>] Tainted: P EFLAGS: 00210202 (2.6.5-rc2) EIP is at reiser4_do_panic+0x1e3/0x2a0 eax: 00000002 ebx: c0587520 ecx: da229d6c edx: c0587520 esi: dae3e000 edi: d7c59cbd ebp: d4613d40 esp: dae3f8d8 ds: 007b es: 007b ss: 0068 Process cc1 (pid: 27626, threadinfo=dae3e000 task=d2c08820) Stack: df74d000 00000001 c045c951 dae3f904 c045ef1f 000001b2 52654973 d4613e1d c021ff22 c045c93c c0478880 c0462117 c0412848 c0461e16 000003c9 d7c59c00 d4613e0c d4613dec c04c9200 d4613d40 dae3fa28 d4613d40 c0220d7e d4613d40 Call Trace: [<c021ff22>] check_dkeys+0xa2/0xa50 [<c0220d7e>] cbk_node_lookup+0x2e/0x590 [<c01b7e25>] schedulable+0x35/0xa0 [<c0221813>] cbk_cache_scan_slots+0x533/0xea0 [<c01c5e97>] zload_ra+0x87/0x220 [<c02221b6>] cbk_cache_search+0x36/0xc0 [<c0231277>] get_tree+0x17/0xc0 [<c021df83>] coord_by_handle+0x13/0x40 [<c021dca3>] object_lookup+0x113/0x3e0 [<c01b7e25>] schedulable+0x35/0xa0 [<c01b7e25>] schedulable+0x35/0xa0 [<c02b58ed>] find_file_item+0x1ad/0x330 [<c02bdde2>] tail2extent+0x252/0xc00 [<c02bb509>] unpack+0x129/0x1f0 [<c02bcd7a>] get_exclusive_access+0x7a/0x2b0 [<c01e5fad>] done_context+0x43d/0x890 [<c02babb4>] check_pages_unix_file+0x104/0x170 [<c01b86b5>] no_counters_are_held+0x5/0xa0 [<c01e5fad>] done_context+0x43d/0x890 [<c02bac7a>] mmap_unix_file+0x5a/0x120 [<c0240abc>] reiser4_mmap+0x6c/0xf0 [<c0147661>] do_mmap_pgoff+0x321/0x690 [<c010daf8>] sys_mmap2+0x78/0xb0 [<c0107335>] sysenter_past_esp+0x52/0x71 Code: 0f 0b 4b 00 52 c9 45 c0 c7 04 24 48 c6 45 c0 c7 44 24 04 e0 <6>note: cc1[27626] exited with preempt_count 2 bad: scheduling while atomic! Call Trace: [<c011ac12>] schedule+0x582/0x590 [<c011acc1>] __wake_up_common+0x31/0x60 [<c02d9640>] rwsem_down_failed_common+0x90/0x150 [<c02d93f9>] rwsem_down_read_failed+0x29/0x40 [<c01212b6>] .text.lock.exit+0x6b/0xf5 [<c0108740>] do_invalid_op+0x0/0xd0 [<c0108459>] die+0xf9/0x100 [<c0108809>] do_invalid_op+0xc9/0xd0 [<c01b7b23>] reiser4_do_panic+0x1e3/0x2a0 [<c032d51f>] vt_console_print+0x5f/0x2f0 [<c0119cac>] try_to_wake_up+0xac/0x160 [<c011e5a7>] __call_console_drivers+0x57/0x60 [<c011acc1>] __wake_up_common+0x31/0x60 [<c0107d91>] error_code+0x2d/0x38 [<c01b7b23>] reiser4_do_panic+0x1e3/0x2a0 [<c021ff22>] check_dkeys+0xa2/0xa50 [<c0220d7e>] cbk_node_lookup+0x2e/0x590 [<c01b7e25>] schedulable+0x35/0xa0 [<c0221813>] cbk_cache_scan_slots+0x533/0xea0 [<c01c5e97>] zload_ra+0x87/0x220 [<c02221b6>] cbk_cache_search+0x36/0xc0 [<c0231277>] get_tree+0x17/0xc0 [<c021df83>] coord_by_handle+0x13/0x40 [<c021dca3>] object_lookup+0x113/0x3e0 [<c01b7e25>] schedulable+0x35/0xa0 [<c01b7e25>] schedulable+0x35/0xa0 [<c02b58ed>] find_file_item+0x1ad/0x330 [<c02bdde2>] tail2extent+0x252/0xc00 [<c02bb509>] unpack+0x129/0x1f0 [<c02bcd7a>] get_exclusive_access+0x7a/0x2b0 [<c01e5fad>] done_context+0x43d/0x890 [<c02babb4>] check_pages_unix_file+0x104/0x170 [<c01b86b5>] no_counters_are_held+0x5/0xa0 [<c01e5fad>] done_context+0x43d/0x890 [<c02bac7a>] mmap_unix_file+0x5a/0x120 [<c0240abc>] reiser4_mmap+0x6c/0xf0 [<c0147661>] do_mmap_pgoff+0x321/0x690 [<c010daf8>] sys_mmap2+0x78/0xb0 [<c0107335>] sysenter_past_esp+0x52/0x71
config.gz
Description: GNU Zip compressed data