> > On Monday 06 June 2005 14:04, you wrote:
> > > Hello
> > >
> > > On Mon, 2005-06-06 at 10:00, R Deepak wrote:
> > > > Greets!
> > > >
> > > > Can I ask support questions here? If not, sorry.. :(
> > > >
> > > > I have a RAID0 config with 2 80GB SATA disks. I screwed up during an
> > > > install and the super block got overwritten.
> > > >
> > > > When I ran reiserfsck on /dev/md0, it asked me to use --rebuild-sb
> > > > Which I did. It reported quite a few errors and moved lots of files
> > > > to lost+found.
> > > >
> > > > Now the problem is that I am not able to mount this partition. I've
> > > > tried with different kernels, gentoo 2005.0 live CD (amd64), knoppix
> > > > (32bit), and an old gentoo 2004.1 (x86) live CD.
> > > >
> > > > As soon as I try to mount it, I get something like the following
> > > >
> > > > ReiserFS: md0: found reiserfs format "3.6" with standard journal
> > > > <kernel panic>
> > >
> > > There should be more than that. Can you please show all kernel logs
> > > related to the problem.
> >
> > There is.. I'll have to write it down since everything freezes. Will send
> > the whole thing as soon as I get back home.
>
> You should use either serial console or netconsole to catch kernel logs
> in case when they do not manage to not get written to log files.
> You can read linux/Documentation/serial-console.txt and
> linux/Documentation/networking/netconsole.txt about those things.
've attached the dmesg output and the output of "debugreiserfs
/dev/md0". Should I send you something else?
One correction though.. the system didn't freeze. There was just an oops.
Please help..
Regards
Deepak
gt64 root # debugreiserfs /dev/md0
debugreiserfs 3.6.19 (2003 www.namesys.com)
Filesystem state: consistent
Reiserfs super block in block 2 on 0x900 of format 3.6 with standard journal
Count of blocks on the device: 39074048
Number of bitmaps: 1193
Blocksize: 4096
Free blocks (count of blocks - used [journal, bitmaps, data, reserved] blocks):
8088863
Root block: 30086
Filesystem is clean
Tree height: 5
Hash function used to sort names: "r5"
Objectid map size 972, max 972
Journal parameters:
Device [0x0]
Magic [0x7e8f0ae8]
Size 8193 blocks (including 1 for journal header) (first block 1196)
Max transaction length 1024 blocks
Max batch size 900 blocks
Max commit age 30
Blocks reserved by journal: 0
Fs state field: 0x0:
sb_version: 2
inode generation number: 25219262
UUID: 2234f94c-a9be-46ec-9bb7-018a53f424b4
LABEL:
Set flags in SB:
ATTRIBUTES CLEAN
Bootdata ok (command line is root=/dev/hda2 vga=9)
Linux version 2.6.11-gentoo-r9 ([EMAIL PROTECTED]) (gcc version 3.4.3 20041125
(Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #1 Sun Jun 5 11:03:09 IST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000faac0
ACPI: XSDT (v001 A M I OEMXSDT 0x08000403 MSFT 0x00000097) @
0x000000003ff30100
ACPI: FADT (v003 A M I OEMFACP 0x08000403 MSFT 0x00000097) @
0x000000003ff30290
ACPI: MADT (v001 A M I OEMAPIC 0x08000403 MSFT 0x00000097) @
0x000000003ff30390
ACPI: OEMB (v001 A M I OEMBIOS 0x08000403 MSFT 0x00000097) @
0x000000003ff40040
ACPI: DSDT (v001 A0091 A0091006 0x00000006 MSFT 0x0100000d) @
0x0000000000000000
On node 0 totalpages: 261936
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 257840 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:12 APIC version 16
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ e0000000 size 256 MB
Built 1 zonelists
Kernel command line: root=/dev/hda2 vga=9 console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 1802.347 MHz processor.
Console: colour VGA+ 132x44
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1024160k/1047744k available (3253k kernel code, 22880k reserved, 1192k
data, 172k init)
Calibrating delay loop... 3538.94 BogoMIPS (lpj=1769472)
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 2800+ stepping 00
tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired
Parsing all Control
Methods:...........................................................................................................................................
Table [DSDT](id F004) - 517 Objects with 44 Devices 139 Methods 25 Regions
ACPI Namespace successfully loaded at root ffffffff805d03c0
evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful
Using local APIC NMI watchdog using perfctr0
Using local APIC timer interrupts.
Detected 12.516 MHz APIC timer.
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block : Found 7 Wake, Enabled 0 Runtime GPEs
in this block
Completing Region/Field/Buffer/Package
initialization:........................................................................................................................
Initialized 24/25 Regions 44/44 Fields 39/39 Buffers 13/14 Packages (526 nodes)
Executing all Device _STA and_INI
methods:...............................................
47 Devices found containing: 47 _STA, 0 _INI methods
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to [EMAIL PROTECTED]
** so I can fix the driver.
TC classifier action (bugs to [EMAIL PROTECTED] cc [EMAIL PROTECTED])
agpgart: Detected AGP bridge 0
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0xe0000000
PCI-DMA: Disabling IOMMU.
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Total HugeTLB memory allocated, 0
inotify device minor=63
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
Initializing Cryptographic API
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60
seconds).
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
input: PC Speaker
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
floppy0: no floppy controllers found
loop: loaded (max 8 devices)
nbd: registered device at major 43
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: QUANTUM FIREBALLlct15 20, ATA DISK drive
hdb: Maxtor 6Y200P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ATAPI DVD-ROM 16X Maximum, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 39876480 sectors (20416 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(66)
hda: cache flushes not supported
hda: hda1 hda2
hdb: max request size: 1024KiB
hdb: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(133)
hdb: cache flushes supported
hdb: hdb1 hdb2 < hdb5 > hdb3 hdb4
hdc: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
sata_via version 1.1
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
sata_via(0000:00:0f.0): routed to hard irq line 4
ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD400 irq 169
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xD802 bmdma 0xD408 irq 169
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:007f
ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_via
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:007f
ata2: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
ata2: dev 0 configured for UDMA/133
scsi1 : sata_via
Vendor: ATA Model: ST380013AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST380013AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: irq 177, pci mem 0xfdf00000
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 177, io base 0xdc00
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#2)
uhci_hcd 0000:00:10.1: irq 177, io base 0xec00
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#3)
uhci_hcd 0000:00:10.2: irq 177, io base 0xc000
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#4)
uhci_hcd 0000:00:10.3: irq 177, io base 0xc400
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid10 personality registered as nr 9
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 5444.000 MB/sec
raid5: using function: generic_sse (5444.000 MB/sec)
raid6: int64x1 1472 MB/s
raid6: int64x2 2132 MB/s
raid6: int64x4 2253 MB/s
raid6: int64x8 1542 MB/s
raid6: sse2x1 1085 MB/s
raid6: sse2x2 1921 MB/s
raid6: sse2x4 2511 MB/s
raid6: using algorithm sse2x4 (2511 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e)
powernow-k8: BIOS error - no PSB
ACPI wakeup devices:
PCI0 PS2K PS2M UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB
ACPI: (supports S0 S1 S3 S4 S5)
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdb1
raid0: comparing sdb1(78148096) with sdb1(78148096)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda1
raid0: comparing sda1(78148096) with sdb1(78148096)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 156296192 blocks.
raid0 : conf->hash_spacing is 156296192 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 172k freed
Adding 977216k swap on /dev/hda1. Priority:-1 extents:1
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:11.5 to 64
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
codec_read: codec 0 is not valid [0xfe0000]
cdc_acm 2-2:1.0: ttyACM0: USB ACM device
usbcore: registered new driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for USB
modems and ISDN adapters
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg,
GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 918 MBytes.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 193
[fglrx] module loaded - fglrx 8.12.10 [Apr 4 2005] on minor 0
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState = 0x1f000a1a (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
[fglrx] free AGP = 256126976
[fglrx] max AGP = 256126976
[fglrx] free LFB = 116387840
[fglrx] max LFB = 116387840
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 65536
ReiserFS: hdb5: found reiserfs format "3.6" with standard journal
ReiserFS: hdb5: using ordered data mode
ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb5: checking transaction log (hdb5)
ReiserFS: hdb5: Using r5 hash to sort names
PPP: VJ decompression error
PPP: VJ decompression error
PPP: VJ decompression error
PPP: VJ decompression error
PPP: VJ decompression error
PPP: VJ decompression error
usb 2-2: USB disconnect, address 2
usb 2-2: new full speed USB device using uhci_hcd and address 3
cdc_acm 2-2:1.0: ttyACM0: USB ACM device
Losing some ticks... checking if CPU frequency changed.
PPP: VJ decompression error
PPP: VJ decompression error
PPP: VJ decompression error
PPP: VJ decompression error
PPP: VJ decompression error
PPP: VJ decompression error
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev md0.
ReiserFS: md0: found reiserfs format "3.6" with standard journal
Unable to handle kernel paging request at ffffc200002ec008 RIP:
[<ffffffff801cbc35>]
PGD 3ff12067 PUD 3ff11067 PMD 3f521067 PTE 0
Oops: 0002 [1] PREEMPT
CPU 0
Modules linked in: fglrx ppp_deflate zlib_deflate bsd_comp ppp_async crc_ccitt
ppp_generic slhc w83627hf eeprom i2c_sensor i2c_isa snd_ioctl32 snd_pcm_oss
snd_mixer_oss snd_seq_oss snd_seq_midi_event snd_seq cdc_acm i2c_viapro
i2c_core snd_via82xx snd_mpu401_uart snd_emu10k1 snd_rawmidi snd_seq_device
snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_util_mem snd_hwdep snd
siimage
Pid: 27434, comm: mount Tainted: P 2.6.11-gentoo-r9
RIP: 0010:[<ffffffff801cbc35>] [<ffffffff801cbc35>]
RSP: 0018:ffff81002ecd5ac8 EFLAGS: 00010202
RAX: ffff81000d5edd98 RBX: ffffc200002e9000 RCX: ffff81002ecd5a70
RDX: ffff81000d5edd98 RSI: ffff81002ecd5a58 RDI: ffff810001dff6d0
RBP: 0000000000003000 R08: ffff81002ecd4000 R09: 0000000000000001
R10: 00000000ffffffff R11: ffffffff8035d100 R12: ffff81003d9bcc00
R13: ffff810011991800 R14: 0000000000000300 R15: ffff81000359b000
FS: 00002aaaaaff36d0(0000) GS:ffffffff805f5f40(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc200002ec008 CR3: 00000000080d8000 CR4: 00000000000006e0
Process mount (pid: 27434, threadinfo ffff81002ecd4000, task ffff810031424130)
Stack: 0000000000000000 ffffffea00000003 ffff81000359b000 0000000000000001
0000000000000000 0000000000000000 0000000000000000 0000000000000000
0000000000000000 0000000000000000
Call Trace:[<ffffffff802838b5>] [<ffffffff801cb980>] [<ffffffff80283be3>]
[<ffffffff80282d3e>] [<ffffffff8017bc0e>] [<ffffffff8017c540>]
[<ffffffff801cb980>] [<ffffffff8017c6a0>] [<ffffffff8017c93f>]
[<ffffffff80194c9f>] [<ffffffff80120b1c>] [<ffffffff80164e40>]
[<ffffffff80158d11>] [<ffffffff8010ecf1>] [<ffffffff8015922f>]
[<ffffffff801950bc>] [<ffffffff8010e3d6>]
Code: 48 89 44 1d 08 49 8b 84 24 50 02 00 00 48 8b 40 10 48 83 7c
RIP [<ffffffff801cbc35>] RSP <ffff81002ecd5ac8>
CR2: ffffc200002ec008
