thanks neil my frequency counter is a dse k3437 and i use it to align my uhf cbs and vhf radios but i also double check it with the wavetec 3000b service monitor .I was hopeing to find a reasonably accurate way to check the aligment of the 3000b and the frequency counter ----- Original Message ----- From: "Neil McKie" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Wednesday, December 03, 2003 3:19 PM Subject: Re: [Repeater-Builder] crystal alignment
> > Somehow I just knew this was going to come up ... > > From time to time, I check the frequency measuring accuracy of my > service monitor ... I hang a long wire antenna on it, dial in WWV > and see who is wrong. > > Works for me ... > > Neil McKie - WA6KLA > > > kf0m wrote: > > > > My freq counter has a 10 Mhz time base. It radiates enough signal > > to be picked up in my HF receiver. I just tune in 10Mhz WWV and zero > > beat the freq counter oscillator against the 10 Mhz WWV signal. > > > > John Lock KF0M > > Wichita KS > > kf0m at arrl dot net > > > > > -----Original Message----- > > > From: ian wells [mailto:[EMAIL PROTECTED] > > > Sent: Tuesday, December 02, 2003 10:15 AM > > > To: Repeater-Builder@yahoogroups.com > > > Subject: [Repeater-Builder] crystal alignment > > > > > > > > > hi guys > > > i am wonderinfg if there is a generator circuit available on the web that > > > allows accurate alignment of frequency counters > > > thanks ian > > > > > > > > > > > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > > > > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > > > > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/