Re: [[Repeater-Builder] Repeater Help]

[James]

Mastr II PA's should be easy to rebuild?? A few new transistors, etc. and some TLC and that would work better than any ham grade stuff. unless of course it is lightning toast. James Kevin Bednar wrote: Unfortunately Joe, everything for this project is being donated for an OEM/RACES project to improve county coverage, specifically because of the lack of $$. I also wanted a Mastr II (got one donated but upon further inspection was missing a board and the PA was toast.) or a Micor but unfortunately no one was able to donate one. I myself would not want to go the ebay route because I wouldn't want to screw someone else over with the same POS problems I'm experiencing with it. Thanks. Kevin -----Original Message----- From: mch [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 06, 2004 5:28 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [[Repeater-Builder] Repeater Help] Well, if you really have the 'anatomy' to do this: Sell it on eBay, take the money, and buy something that will work much better. (such as a used MASTR II or Micor) Personally, I wouldn't do that to someone else, but it is your choice. Joe M. Kevin Bednar wrote: I kinda figured that John from what I've been told, but unfortunately there is $0 to replace it with something else. I didn't pay for it so that's why I was trying to get it working. Thanks. Kevin -----Original Message----- From: JOHN MACKEY [mailto:[EMAIL PROTECTED]] Sent: Tuesday, January 06, 2004 5:23 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [[Repeater-Builder] Repeater Help] You can best modify the spectrum by replacing the following components: power supply, transmitter, receiver, controller. It should then perform well if you used good replacement parts. "kbednar99" <[EMAIL PROTECTED]> wrote: Ok, at the risk of being flamed I am gonna' ask this question anyway. ;) I have inherited a Spectrum Communications SCR-4000 repeater. Receive seems to work fine but the TX freq drifts after a few minutes no matter how many times I reset it. It has the TCXO option in it but it doesnt seem to matter. Any Ideas on what might be causing this? Spectrum has been LESS than helpful, other than to say "we discontinued it over 10 years ago and can't help you" and "we can sell you a manual if you want though!". Thats great. Also, does anyone know what mods are needed to run this unit with an outboard controller, as the Spectrum one sucks. Any and all help is GREATLY appreciated! Kevin K2KMB Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ To unsubscribe from this group, send an email to: [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ Yahoo! Groups Links To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/   To unsubscribe from this group, send an email to: [EMAIL PROTECTED]   Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.