At 07:54 PM 3/12/04 +0000, you wrote:
>The thing works fine - it's a lowband Exec II 42-50 MHz model and I'm
>running it at 53.550 MHz with 100 W output. The exciter runs around
>200 mW. I have gone through and peaked everything for max output but
>I'm sure this isn't the proper way because you're supposed to peak
>and dip certain stages according to the VTVM or test set plugged into
>the jack. I would just rather align it properly to satisfy my mind.
>
> > I think you will find that the MASTR Exec II and the MASTR II
> > multiplier exciters and receivers are very similar in their basic
> > design.
>
>I would love to find either a Mastr Exec or Mastr II alignment
>instructions then if this is the case.
>
>Thanks for the reply,
>Derek KC4FWC
If anybody wants to scan them and email me the scans I'll put them
up on www.repeater-builder.com
Mike WA6ILQ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
