Yes, but so did Motorola and GE. Regency made several products. Why you ask?
----- Original Message ----- From: "Neil McKie" <[EMAIL PROTECTED]> To: <Repeater-Builder@yahoogroups.com> Sent: Tuesday, March 23, 2004 2:11 PM Subject: Re: [Re: [Repeater-Builder] Motorola Motrac Radio] > > Doesn't / didn't regency make scanners and CB's? > > Mathew Quaife wrote: > > > > Thanks for the input. Gonna stick with the Regency until something better > > comes along. It is working, so is all i can expect. > > > > Mathew > > > > ----- Original Message ----- > > From: "Ken Arck" <[EMAIL PROTECTED]> > > To: <Repeater-Builder@yahoogroups.com> > > Sent: Tuesday, March 23, 2004 9:34 AM > > Subject: Re: [Re: [Repeater-Builder] Motorola Motrac Radio] > > > > > At 09:17 AM 3/23/2004 -0800, you wrote: > > > >Just before the transistor, solid state tubes. They are small and round. > > > > > > <---As I posted earlier, the only "solid state tubes" I can think of were > > > actually "solid state" diodes that were made as replacements for the older > > > vacuum tube rectifiers, such as the 5U4 series. I don't remember ever > > > seeing these type of replacements for tubes such as triodes, pentodes and > > > so on. Anyway, those M9394's are transistors (germanium as I recollect) > > > that are part of the high voltage power supply and aren't RF devices. > > > > > > But I suppose this is all moot - it would make a terrible repeater in any > > > case :-) > > > > > > Ken > > > -------------------------------------------------------------------------- > > ---- > > > President and CTO - Arcom Communications > > > Makers of state-of-the-art repeater controllers and accessories. > > > http://www.ah6le.net/arcom/index.html > > > AH6LE/R - IRLP Node 3000 > > > http://www.irlp.net > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
