I don't use a blanker on my 6 meter machine, but I've heard that some have
had success connecting the blanker to a separate RX antenna.
Another approach is to use a Delta with the blanker board installed. This
blanker does its job at I.F. frequencies instead of a separate front end. It
worked great on the mobile I used to have installed.
Chuck
WB2EDV
----- Original Message -----
From: "kq2h" <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Sunday, March 28, 2004 9:39 PM
Subject: [Repeater-Builder] Low Band Noise Blanker Question
> Does anyone know where I can find tuning instructions for a GE Mastr
> II Low Band receiver noise blanker? I have looked in service manuals
> and have found no information.
>
> Has anyone used a noise blanking receiver as a repeater receiver on
> 6M or 10M ? The noise blanker seems to help in a mobile environment,
> but I am not sure if it would work with a duplexer or bandpass
> cavitiy inline with the antenna. The sampling frequency will not pass
> through.... Alex
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
