I WANT TO THANK ALL THAT REPLIED AND TOOK THE TIME TO HELP ME. IT WAS ALL
GREAT ADVICE. I FOUND THAT THE RADIO WAS CLEAN AND SO WAS THE SITE, SWR WAS
LOW BUT ON THE WEEKEND I WAS GETTING SOME SIGNAL FROM SOMEPLACE THAT WAS
KEYING THE REPEATER AND SOMETIMES DROPPING OUT THEN BACK ON AND OTHER TIMES
WOULD GO ON AND ON(WILL BE WATCHING FOR THIS).
I HAVE LEARNED THAT IF YOU WANT TO PLU A TS-32 ENCODE/DECONE BOARD ONTO THE
SYSTEM BOARD OF A MASTR II MOBILE USED AS A REPEATER- IT IS AS EASY AS:
CONNECT PIN 2 ON P908 TO PIN 6 ON J902 (MIC HI)
CUT THE TRACE FROM PIN 3 ON P908 ON THE BOARD
AND ADD A WIRE THAT CONNECTS PIN 3 ON P908 TO PIN 9 ON J904 BOARD (CAS)
THEN PLACE TS-32 ONTO P908 AND ITS THAT EASY...73 AND THANKS AGAIN N2LSJ
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
