Yeah,I know all that,I think the previous owner blew it up already,hence the
need for a schizmo...Thanks
----- Original Message -----
From: Russell Filling <[EMAIL PROTECTED]>
To: <Repeater-Builder@yahoogroups.com>
Sent: Saturday, April 10, 2004 12:52 PM
Subject: Re: [Repeater-Builder] RC-1000 schematic
> lee , i had to add an external dual relay tothe ptt circuit on the
> rc-1000 , the opencollector only switches about 20 ma , so what i
did
> , was tap 5vt off the output of the voltage reg in the controller toa
> 5 volt reed relat that drives a 12 volt relay to key the tx strip ,
the
> dual relay can switch up to a 3 amp load
> Russ
> N3TIH
>
> ----- Original Message -----
> From: "Q" <[EMAIL PROTECTED]>
> To: <Repeater-Builder@yahoogroups.com>
> Sent: Saturday, April 10, 2004 12:42 PM
> Subject: [Repeater-Builder] RC-1000 schematic
>
>
> > I'm trying to add a remote base to my RC-1000 but the controller won't
> send
> > any PTT. Anyone have a schematic for this model? Thanks,73,Lee,N3APP
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
